12 | INSTALLING YOUR NEW RECORDER |
Basic Connection
Aerial connector
Back of TV |
|
|
| TV aerial cable | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RF cable
(provided)
Mains outlet
| ANTENNA | ||
Mains power cord | IN |
|
|
| |||
|
|
|
|
ANTENNA | |
| OUT |
ATTENTION:
Your TV must have a
It’s essential that your video recorder be properly connected.
THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.
A Check the contents.Make sure the package contains all of the accessories listed in “Check Contents” on page 101.
B Situate the recorder.Place the recorder on a stable, horizontal surface.
C Connect the recorder to TV.ADisconnect the TV aerial cable from the TV.
BConnect the TV aerial cable to the ANTENNA IN connector on the rear panel of the recorder.
CConnect the provided RF cable between the ANTENNA OUT connector on the rear panel of the recorder and the TV’s aerial connector.
DConnect the provided
recorder and the TV’s
●The
●Set your TV to the VIDEO (or AV), Y/C, or RGB mode according to the type of your TV’s SCART connector.
●For switching the TV’s mode, refer to the instruction manual of your television.
●To obtain
Plug the end of the mains power cord into a mains outlet.
After the connection is completed, perform “Auto Set Up” on page 14.