14

INITIAL SETTINGS

Auto Set Up

Auto Channel Set/Auto Clock Set/ Auto Guide Program Number Set

Slide TV/CABLE/SAT switch to the right.

?

Before starting, make sure of the following:

●The TV aerial cable should be connected to the recorder.

●The recorder’s mains power cord should be connected to a mains outlet.

●The TV should be set to its AV mode.

After the 1 button on the recorder or remote control is pressed for the first time to power on the recorder, the Auto Set Up function sets the tuner channels, clock and Guide Program numbers automatically.

A Turn on the recorder.

Press 1 on the recorder or remote control.

NOTE:

For a few seconds after you pressed 1, you can not stop Auto Set Up, even if you press MENU to cancel this procedure.

B Perform Auto Set Up.

The AUTO SET/T-V LINK display appears on the front display panel and/or on the TV screen.

On the front display panel Press rt to select “Auto” and press OK or e.

On the on-screen display Press rt to move the highlight bar (pointer) to “AUTO SET” and press OK or e.

“Auto” blinks on the front display panel; do NOT press any button on the recorder or remote control until the front display panel shows clock time, “(CH) 1” or “– –:– –” as illustrated on page 17.