|
| 95 |
|
|
|
SYMPTOM | POSSIBLE CAUSE | CORRECTIVE ACTION |
3. | ● The source (another video recorder, | Confirm that the source is properly |
possible. | camcorder) has not been properly | connected. |
| connected. |
|
| ● All necessary power switches have | Confirm that all units’ power switches |
| not been turned on. | are turned on. |
| ● The input mode is not correct. | Set the input mode to |
|
| |
|
|
|
4. Camcorder recording is not | ● The camcorder has not been | Confirm that the camcorder is |
possible. | properly connected. | properly connected. |
| ● The input mode is not correct. | Set the input mode to |
|
| |
|
|
|
5. “” and “$” on the front display | ● The end of the tape was reached | ● The programme may not have been |
panel won’t stop blinking. | during recording. | recorded in its entirety. Next time |
|
| make sure you have enough time |
|
| on the tape to record the entire |
|
| programme. |
|
|
|
TIMER RECORDING |
|
|
|
|
|
SYMPTOM | POSSIBLE CAUSE | CORRECTIVE ACTION |
1. Timer recording won’t work. | ● The clock and/or the timer have | |
| been set incorrectly. | settings. |
| ● The timer is not engaged. | Press # and confirm that “#” is |
|
| displayed on the front display panel. |
|
|
|
2. Timer programming is not | ● Timer recording is in progress. | Timer programming can’t be |
possible. |
| performed while a timer recording is |
|
| in progress. Wait until it finishes. |
|
|
|
3. “#” on the front display panel or | ● The timer is engaged but there’s no | Load a cassette with the record safety |
cassette loaded. | tab intact. | |
blinking. | ● The cassette is ejected, then the |
|
| recorder is powered off |
|
| automatically after the end of the |
|
| tape is reached during timer |
|
| recording. |
|
|
|
|
4. “#”, “” and “$” on the front | ● The loaded cassette has had its | Remove the cassette and cover the |
display panel won’t stop blinking. | record safety tab removed. | hole with adhesive tape, or insert a |
|
| cassette with the record safety tab |
|
| intact. |
| ● The end of the tape was reached | The programme may not have been |
| during timer recording. | recorded in its entirety. Next time |
|
| make sure you have enough time on |
|
| the tape to record the entire |
|
| programme. |
|
|
|