18 | SAT CONTROL SET |
Satellite Receiver Control Setting
Satellite receiverYour recorder | Satellite Controller |
| (suggested locations) |
Transmitter
Satellite receiver
Back of recorder
The following procedure is required if you receive satellite channels through a satellite receiver. Approximately 20 seconds before the VIDEO PLUS+ timer programming ( pg. 46) or Express timer programming ( pg. 48) starts, the recorder sets its input mode to
Place the Satellite Controller so that the path between its transmitter and the satellite receiver’s remote sensor is unobstructed.
B Attach the Satellite Controller.Fix securely using the adhesive strip attached on the back of the Satellite Controller.
C Make connections.Be sure to connect the recorder’s
NOTE:
When connecting your satellite receiver, refer to its instruction manual.
D Connect the Satellite Controller to the recorder.Connect the Satellite Controller to the SAT CONTROL connector on the rear panel.