60

EDITING (cont.)

Play List Features

A play list is a collection of the scenes selected from original recorded programmes. A play list can be freely edited and played back without ever changing any original recorded data. A play list includes information such as the beginning and ending time of the scenes, indexes for checking the contents of the recorded data, category information, and more. Playback according to the play list you have created allows you to enjoy various combinations of video images from programmes recorded on the hard disk drive.

?

Create Play List

A Turn on the recorder.

Press 1.

B Select the deck.

Slide TV/CABLE/SAT to the right, then press HDD.

C Access the Navigation screen.

Press EDIT.

D Select the programme and access the play list screen.

APress w r e t to move the arrow to “CREATE” under “PLAY LIST”, then press OK.

BPress w r e t to move the arrow to the original programme index for the play list to reference, then

press OK.

●Playback of the selected programme starts in the left large window.

E Select the desired scene.

A Confirm the arrow is on

“IN/OUT”. The picture for

EDITIEREN WIEDERGABELISTE ÄNDERN

 

 

SEITE

the beginning of the

 

 

 

selected scene appears in

 

 

 

the left bottom “IN”

 

 

 

window.

ANF./ENDE

ÄNDERN

VERSCHIEBEN VORSCHAU

 

PROG. WÄHLEN

LÖSCHEN

NEUVERSUCH

BPress the appropriate buttons (4, 9, 5, or 3) to search for the desired point. You can also search for the desired point by turning and pressing the JOG dial.

CPress OK when beginning picture of the desired scene is found.

DPerform steps A to C again to locate the ending picture for the desired scene. The picture selected as the ending scene appears in the right bottom “TO”

window.

●The selected scene information (original programme number, beginning time and ending time) appears in the scene list and playback of the programme after the selected scene starts.

●While your are editing a programme in DV mode, the distortion of the picture on the small window (showing the result of the edition) does not affect the actual edited picture.

F Select other scenes.

Repeat step E as required.

●To select a scene in another programme, press w r e t to

move the arrow to “SELECT PROG.”, then press OK. After that, repeat steps B of D and E.