43

Elapsed Recording Time Indication

1 Set the counter display.

Press – –:– – so that a counter reading appears on the TV screen and the front display panel.

●The front display panel shows

the counter reading with “:” lit.

2 Reset the counter.

Press 0000 before starting recording or playback.

● The counter is reset to “0:00:00” and shows the exact elapsed

?

time as the tape runs. You can check the exact time of a

recording or playback.

 

Tape Remaining Time

Press MODE.

● The current tape remaining time and the current recording speed alternate in the front display panel. You can also confirm the information on the TV screen. ( pg. 10)

NOTE:

Depending on the type of tape being used, the tape remaining time reading may not appear right away, or is not correct.

“– –:– –” may sometimes appear, or the display may blink on occasion.

Super VHS ET (S-VHS ET)

—Recording on VHS cassettes with S-VHS quality

You can record in SP mode on VHS cassettes with S-VHS picture quality. Set “S-VHS ET“ to the desired mode ( pg. 80).