52 | REMOTE CONTROL FUNCTIONS |
Remote A/B/C/D Code Switching
The remote control is capable of controlling four JVC video recorders independently. Each of recorders can respond to one of four codes (A, B, C or D). The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B, C or D code signals.
?
●Slide TV/CABLE/SAT to the right, then press and hold
Press the number key “1” for A, “2” for B, “3” for C or “4” for D.
B Set the remote control code.Press OK to set the code.
On the recorderC Display the code.Press 4 on the recorder for over 5 seconds while the recorder is turned off. The code currently set appears on the front display panel.
●If the code displayed on the front display panel is different from the code set on the remote control, go to step D.
D Change the recorder’s code.Press 8 on the remote control. The code currently set on the remote control will be applied to the recorder.