79
* The default setting is bold in the table below.
8 | LIVE MEMORY | When this function is set to “30MIN”, “1HR” or “3HR”, hard disk drive illumination lights blue and |
| OFF | you can apply the selected time length to the “Live Memory Features” ( pg. 28). |
| 30MIN |
|
| 1HR |
|
| 3HR |
|
|
|
|
8 | AUDIO REC | When this function is set to “NICAM”, the NICAM audio programmes will be recorded. |
| NICAM | When this function is set to “MONO”, the Standard (monaural) audio programmes will be |
| MONO | recorded. |
|
| NOTE: |
|
| This function works only on NICAM bilingual programme. |
|
|
|
8 | JUMP TIME | You can locate a scene ahead or behind of the currently viewed one by jumping a selected time |
| 15 MIN | interval during playback (or Live Memory Playback) or recording (or Live Memory Recording). |
| 30 MIN |
|
| 1 HR |
|
|
|
|
HDD SET UP 2
* The default setting is bold in the table below.
8 DV AUDIO REC | Select the appropriate mode before recording to the HDD deck. | |
12BIT | 12BIT: | Enables Audio Dubbing later. |
16BIT | 16BIT: | Audio Dubbing later is impossible but recorded sound quality is higher than |
|
| “12BIT”. |
| NOTES: |
|
| ● When input mode is set to | |
|
| |
8 AUDIO MODE | Select the appropriate mode when playing back an | |
SOUND1 | SOUND1: | Original recorded sound |
SOUND2 | SOUND2: | |
MIX | MIX: | Original recorded sound and |
NOTES: |
| |
|
| |
| ● When “AUDIO MODE” is set to “MIX”, both the main and sub audio tracks will be audible on | |
| bilingual tapes. |
|
| ● To select only the main audio or only the sub audio track on bilingual tapes, set “AUDIO MODE” to | |
| “SOUND1”. |
|
* The default setting is bold in the table below.
8 NAVIGATION | When a programme is recorded on the cassette with this function set to “ON”, you can use VCR |
ON | Navigation ( pg. 36, 55). |
OFF