
90 | SUBSIDIARY SETTINGS (cont.) |
Set station names that are registered in your recorder.
Perform steps A and C of “Manual Channel Set” on page 88 to access the Confirmation screen before continuing.
A Select the item.
Press w r e t until the item you want begins blinking.
B Access the Manual Channel Set screen.Press OK twice.
C Select the new station.Press e until the station name (ID) begins blinking, then press rt until the new station’s name (ID) you want to store begins blinking. Registered station names ( pg. 91) appear as you press rt.
D Switch the stations.Press OK.
●The Confirmation screen appears.
●Repeat steps A – D as necessary.
E Close the Confirmation screen.Press MENU.
Set Stations (B)Set station names other than the ones registered in your recorder.
Perform steps A and C of “Manual Channel Set” on page 88 to access the Confirmation screen and then perform steps A and B of “Set Stations (A)” in the left column before continuing.
A Select the character for station name.Press e until the first letter of the station name begins blinking.
B Enter the new character.characters the same way (maximum of 4). After entering all characters, press OK.
●The Confirmation screen appears.
●If you make a mistake, press w until the incorrect character begins blinking. Then enter the correct character by pressing rt.
C Close the Confirmation screen.
Press MENU.
NOTE:
The characters available for the station name (ID) are
Perform steps A and C of “Manual Channel Set” on page 88 to access the Confirmation screen before continuing.
A Select the channel toPress w r e t until the channel you want to tune begins blinking.
B Access the Manual Channel Set screen.
Press OK twice. The Manual Channel Set screen appears.
C Perform tuning.Press e until
●The Confirmation screen appears.
●Repeat steps A – C as necessary.
D Close the Confirmation screen.Press MENU.
Press rt to cycle through the characters