| 97 |
|
|
|
|
MESSAGE | DESCRIPTION |
CAN NOT MODIFY LIVE MEMORY TIME, MORE | There is not enough memory on the hard disk drive for |
CAPACITY NEEDED | Live Memory Playback. To increase the free space, dub |
DELETE UNWANTED PROGRAMME THEN RETRY | some programmes to cassettes or delete the unwanted |
| programmmes. ( pg. 63, 58) |
|
|
DO YOU WANT TO DELETE SELECTED PROGRAMME? | Appears when you tried to delete the selected programme |
| from the hard disk drive. Make sure you really want to |
| delete the programme. ( pg. 58) |
|
|
DO YOU WANT TO DELETE SELECTED PROGRAMME | Appears when you tried to delete the selected programme |
INFORMATION? | information from the hard disk drive. Make sure you |
| really want to delete the programme information. |
| ( pg. 58) |
|
|
DO YOU WANT TO DELETE SELECTED CASSETTE | Appears when you tried to delete the selected cassette’s |
INFORMATION? | all information from the hard disk drive. Make sure you |
| really want to delete the cassette’s information. |
| ( pg. 58) |
|
|
INSERT CASSETTE | Appears when you tried to modify the information for |
| VCR Navigation, but the cassette is not loaded. To modify |
| the information for VCR Navigation, the cassette must be |
| loaded. ( pg. 56) |
|
|
CAN NOT MODIFY INDEX | It is not possible to modify the index of a programme |
| while the hard disk drive is in recording. Wait until the |
| recording finishes or stop recording to modify the index. |
| ( pg. 56) |
|
|
NO CASSETTE | For VCR Navigation, load a cassette before pressing |
| NAVIGATION. ( pg. 37) |
|
|
“NAVIGATION” IS SET TO “OFF” | For VCR Navigation, set “NAVIGATION” to “ON” on the |
| “VCR SET UP 1” screen, then press NAVIGATION. |
| ( pg. 37, 79) |
|
|
UNABLE TO SET TIMER PROGRAMME | There is not enough memory on the hard disk drive for |
DUE TO SHORTAGE OF CAPACITY | recording. To increase the free space, dub some |
DELETE UNWANTED PROGRAMME FROM HDD | programmes to cassettes or delete the unwanted |
| programmmes. ( pg. 58) |
|
|
PROGRAMME FULL | You can programme this recorder to |
DELETE UNWANTED TIMER PROGRAMME | as 16 programmes. To programme more, you need to |
| cancel a timer programme already set. ( pg. 50) |
|
|
PLEASE ADJUST CLOCK BEFORE TIMER | To set the timer programme, the clock must be set in |
PROGRAMMING | advance. ( pg. 84) |
|
|
GUIDE PROGRAM IS NOT SET | To set the timer programme using the VIDEO PLUS+ |
SET GUIDE PROGRAM THEN RETRY | system, the Guide Program number must be set in |
| advance. ( pg. 83) |
|
|
PLUSCODE NO. ERROR | An invalid PLUSCODE number is input. ( pg. 46) |
CONFIRM PLUSCODE NO. THEN RETRY |
|
|
|