48 | TIMER RECORDING (cont.) |
Express Timer
Programming
You can programme this recorder to
If you do not know the PLUSCODE number for the programme you wish to record, use the following procedure to set your recorder to
●Make sure that the recorder’s
●Turn on the TV and select the AV mode.
●Slide TV/CABLE/SAT switch to the right.
?
A Turn on the recorder.
Press 1.
B Load a cassette.
Insert a VHS (or
APress PROG.
BPress w e to move the arrow to “PROGRAMME”, then
press OK.
●When “PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME” appears on the TV screen, you need to cancel some of the currently set programmes. ( pg. 50)
D Select the programme date.Press w r e t to move the arrow to the desired date, then press OK.
E Select the recording deck.APressr t to move the arrow to “RECORD TO”, then press OK.
BPress r t to select “HDD” or “VHS”, then press OK.
F Set the start time and stop time of the programme.APress t to move the arrow to “START” or “STOP”, then press OK.
BPress r t to select the desired time, then press OK.
G Select the channel position.APress t to move the arrow to “TV PROG”, then press OK.
BPress r t to select the desired channel, then press
OK.
●If you want to set a satellite programme, press the number key “0” to change “TV PROG” to “SAT”, then press VCR
CPress t to move the cursor to “CONFIRM”, then press OK.
H Set the recording speed.APress r t to move the arrow to “REC MODE”, then
press OK.
D Press r t to select the desire mode, then press OK.