15

●If you are using the on-screen display, the AUTO SET

screen will appear. As Auto

 

 

Set Up progresses, the “q”

 

 

mark on the TV screen

 

 

moves from left to right.

 

 

When the Auto Set Up is

 

 

completed, “SCAN

 

 

COMPLETED” appears for

 

 

about 5 seconds, then the

Beginning

End

normal screen appears.

●If you have connected the recorder to a TV offering T-V Link via a 21-pin SCART cable ( pg. 12) and the TV is turned on,

the recorder automatically performs “Preset Download”

( pg. 16) even if you select “Auto” or “AUTO SET” in step B.

ATTENTION

Once you have performed Auto Set Up, even if the recorder’s memory backup has expired, all the stored stations and their Guide Program numbers remain in the recorder’s memory and the recorder will not perform Auto Set Up again. You only need to set the clock. ( pg. 84)

If you have moved to a different area, perform each setting as required.

●Tuner Set ( pg. 86)

●Clock Set ( pg. 84)

If a new station starts broadcasting in your area, perform tuner setting ( pg. 86).

NOTES:

●In the area where no TV station transmits a PDC (Programme Delivery Control) signal, the recorder can perform neither Auto Clock Set nor Auto Guide Program Number Set.

●If there is a power cut, or if you press 1 or MENU while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the recorder power once and try again from step A.

●Auto Clock Set may not function properly depending on the reception condition.