19

Setting satellite receiver’s brand and channel

After installation, set the satellite receiver’s brand and channel correctly; otherwise, the Satellite Controller cannot work correctly.

●Turn on the TV and select the AV mode.

●Slide TV/CABLE/SAT switch to the right.

?

A Turn on the satellite receiver.

Turn on the satellite receiver’s power.

B Access the Main Menu screen on the recorder.

Press MENU.

C Access the Initial Set screen.

APress w e to move the arrow to “INITIAL SET UP”, then press t.

BPress w e to move the arrow to “INITIAL SET”, then press OK.

D Access the Sat Control Set screen.

Press rt to move the highlight bar (pointer) to “SAT CONTROL SET”, then press OK or e.

E Enter the satellite receiver’s brand.

Press the appropriate number keys to enter the brand code from the list on page 20, then press OK.

●If the brand code you entered is invalid, the code field will

be reset. Enter the correct brand code again.

● If the recorder is in playback or

recording mode, you cannot set the brand code.