29
A Turn on the recorder.
Press 1.
B Select the HDD deck.
Press HDD.
C Choose a programme.
Press VCR PR +/– or the number keys to select the channel you wish to record.
●The temporary recording begins.
D Locate the point to start playback from.Press w or 3 to search for the previous part of the currently viewing programme (temporary recorded on the background).
E Start Live Memory Playback.Press 4.
F Stop Live Memory Playback.Press 8.
●The
NOTES:
●You can use various playback features during Live Memory Playback. ( pg. 30)
●If you have started actual recording by pressing 7, pressing 8 in step F only resumes the
The temporary recording for Live Memory is cancelled in the following cases, and will start all over again when it is to resume.
●When the power is turned off
●When the system is powered again after a power failure was occurred
●When normal recording ( pg. 22), timer programme recording ( pg. 46, 48), live memory recording ( right
column), or automatic satellite programme recording ( pg. 51) is performed
●When the thumbnails are changed ( pg. 56)
●When the “LIVE MEMORY” setting is changed ( pg. 79)
●When tuner channel setting is performed ( pg. 14, 86)
Perform steps A to D of “Live Memory Playback” ( pg. 29) before continuing.
A Start Live Memory Recording.On the recorder
Press 7.
On the remote control
Press and hold 7, then press 4.
●HDD REC indicator and the record indicator on the front display panel blinks, then after a few seconds, the current broadcast screen resumes.
B Stop Live Memory Recording.Press 8.
NOTES:
●You cannot use Live Memory Recording for channels other than the channel you are currently watching.
●Recording speed is automatically set to SP mode when Live Memory Recording is started.
●Temporarily recorded data prior to the beginning of Live Memory Recording is erased when Live Memory Recording started.