JVC XM-EX90 manual Remote control batteries, Operating the Remote Control, 1Open the battery case

Remote control batteries

Load the supplied batteries (2) into the remote control.

1Open the battery case.

Push down and pull the lid in the direction of the arrow.

2Load the batteries.

Insert two R03 (UM-4)/AAA(24F) batteries.

Match the polarity (+ and –) of the batteries with the + and – marks inside the battery compartment.

3Close the battery case.

Operating the Remote Control

Point the remote control toward the remote sensor on the front panel. The signal may not reach the remote sensor if the remote control is used at an angle of 60°, or if there are objects between the remote control and the remote sensor.

XM-EX90 MINIDISC RECORDER
/CANCEL
DISC LOADING MECHANISM	INPUT
REC PAUSE	CD REC
SAMPLING RATE CONVERTER
STANDBY	REC LEVEL
POWER

Cautions

Observe the following to avoid battery leakage or explosion:

•If the range or effectiveness of the remote control decreases, replace the batteries using R03 (UM-4)/ AAA(24F) type dry cells.

•Do not use an old battery together with a new one.

•Do not use different types of batteries together.

•Do not disassemble the batteries or subject them to high temperatures, like an open fire.

•Remove the batteries if the remote control will not be used for a long time.

12 XM-EX90