Remote control unit
/CANCEL
/CANCEL
Main unit
5Press £.
Program playback starts.
• If you are operating the main unit, press Ü/8.
Program playback stops after having played all programmed tracks.
To check the programmed tracks and their order:
Press 4 or ¢ on the remote control unit in stop mode.
Pressing ¢ shows programmed track numbers in the order they are programmed (if a track has a title, the title is displayed before the track number). Pressing 4 shows them in the reverse order.
•The programmed tracks cannot be checked by pressing 4 or ¢ on the main unit.
To cancel programmed tracks:
Press &/CANCEL in stop mode.
Each press of &/CANCEL clears the last track in the program.
PLAY MODE
INPUT
If you make a mistake in programming:
Press &/CANCEL in stop mode to clear the last track in the program until the track you programmed by mistake, and
To exit program play mode:
Press PLAY MODE in stop mode and select any play mode other than PROGRAM.
The program contents remain in memory even after the program play mode has been exited.
•The program contents are cleared from memory when the power cord is unplugged or in case of power failure.
To clear the program:
Press 0. The programmed tracks are cleared at the moment the MD is ejected.
To play programmed tracks repeatedly:
Combine the program playback and repeat playback to play the programmed tracks repeatedly.
For the repeat playback, see page 17.
19
