ENTER
INPUT
5Press ENTER.
The change made above is entered temporarily in the memory. The display shows “EDITING”.
1 2 3 4 5
Decrements by 1.
6Press 0 to eject the MD.
The data in the memory is written in the MD before it is ejected.
The display shows “UTOC writing” during MD write operation.
•Be careful not to apply impact to the MD recorder during writing data in the memory in the MD. Otherwise the recording may be unplayable later.
•The data in the memory is written in the MD also when the power is switched to the STANDBY mode while “EDITING” is being displayed.
To exit editing:
Press EDIT before pressing ENTER in step 5, .
To restore the original tracks from the track obtained by joining:
Use the DIVIDE editing function.
See “Dividing tracks (DIVIDE)” on page 28.
Français Deutsch
31
