TRACK
MARKING
TRACK
MARKING
SET
Track marking:
The track numbers on an MD (Mini Disc) are marked at the beginning of each track. The track numbers are identified by these “track markings” and each section between two track markings are considered as a track. This MD recorder can record the track markings either automatically (AUTO) or manually (MANUAL).
•Track markings can be recorded during audio recording.
Automatic track marking:
Press TRACK MARKING on the normal control button panel of the remote control unit to select “AUTO”.
•A track marking is recorded every time a blank of 3 seconds is detected.
Manual track marking:
1Press TRACK MARKING on the normal control button panel of the remote control unit to select “MANUAL”.
2When the point you want to record a track marking comes during recording, press SET on the editing control button panel.
This records a track marking in the point where the button is pressed.
•When CDs are recorded from CD player equipped with the Compu Link remote control system. CD player track markings are recorded automatically at the points where the CD tracks change.
23
