JVC XM-EX90 manual Français Deutsch, 5Fine-adjustthe track marking position by, pressing /4 or ¢

ENTER

INPUT

5Fine-adjust the track marking position by

pressing </4 or ¢/>.

The track marking position can be fine-adjusted in the range of ±128 positions (approx. ±8 sec.).

As you press the button, the track marking displaces slightly and the 3-second section from the newly divided point will be played repeatedly.

• After completing the fine-adjustment, go to step 6.

To correct a previously fine-adjusted track marking position:

1Press CANCEL.

2Select the track number by pressing </4 or ¢/>

and press £.

3Return to step 4.

6Press ENTER.

The change made above is entered temporarily in the memory. The display shows “EDITING”.

1 2 3 4 5

6 7

7Press 0 to eject the MD.

The data in the memory is written in the MD before it is ejected.

The display shows “UTOC writing” during MD write operation.

•Be careful not to apply impact to the MD recorder during writing data in the memory in the MD. Otherwise the recording may be unplayable later.

•The data in the memory is written in the MD also when the power is switched to the STANDBY mode while “EDITING” is being displayed.

To exit editing:

Press EDIT before pressing ENTER in step 6 .

To restore the original track from the divided tracks:

Use the JOIN editing function.

See “Joining tracks (JOIN)” on page 30.

Français Deutsch

29 XM-EX90