INITIAL SETTINGS
Results Of Auto Set Up/Preset Download Appearing On The Front Display Panel
If both Auto Channel Set and Auto Clock Set have been performed successfully, the correct current time is displayed.
Turn on the TV and select an input mode such as EXT1, then make sure that all necessary stations have been stored in the unit’s memory by using the PR +/– button(s).
●If station names (ID – A pg. 91) have also been stored in the unit’s memory, the station name will be displayed at the top right corner of the TV screen for about 5 seconds when the unit is tuned to a different station.
●If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change station names, see pages 80 and 81.
If Auto Channel Set has succeeded but Auto Clock Set has not, APR1B (channel position) is displayed.
OR
If both Auto Channel Set and Auto Clock Set have failed, A-
ATurn on the TV and select an input mode such as EXT1, then make sure that all necessary stations have been stored in the unit’s memory by using the PR +/– button(s).
●If station names (ID – A pg. 91) have also been stored in the unit’s memory, the station name will be displayed at the top right corner of the TV screen for about 5 seconds when the unit is tuned to a different station.
●If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change station names, see pages 80 and 81.
BPerform AClock SetB (A pg. 82).After making sure the cables are connected properly, turn off the unit’s power once, then turn the unit’s power back on again.
The Country Set display appears on the TV screen. Perform AAuto Set UpB (A pg. 17) or APreset DownloadB (A pg. 18) again.
●To check if the Guide Programme numbers have been set correctly, perform the SHOWVIEW Timer Programming. (A pg. 49)
●In certain reception conditions, station names may not be stored correctly, and Auto Guide Programme Number Set may not work properly. If the Guide Programme numbers are not set properly when you timer record a TV programme using the SHOWVIEW system, the unit will record a TV programme of a different station. When programming the timer using the SHOWVIEW system, be sure to check the desired channel is selected correctly.
(A pg. 49)●Your unit memorises all detected stations even if reception of some of them is poor. You can delete those stations with an unacceptable picture. (A pg. 80, ADelete A ChannelB)
The language for the
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| ||
|
|
|
If you want to change the language setting manually, see AOn- screen Language SetB (A pg. 20).
Just ClockYour unit is equipped with the Just Clock function which provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal. If you want to take advantage of this function, simply set AJUST CLOCKB to AONB.
(A pg. 82)T-V Link Functions
When you connect the unit to your TV via a
*Compatible with TVs offering
The TV will turn on and be set to an input mode such as EXT1 automatically whenever you start playback.
For details, refer to the instruction manual of your TV.
Unit Auto StandbyYou can use your TV’s remote control to turn off the unit. For details, refer to the instruction manual of your TV.
Direct RecYou can easily start recording the programme that you are watching on your TV. When you use this function, set ADIRECT RECB to AONB. (A pg. 75)
19