BASIC OPERATIONS ON DVD DECK
Free Rate Function
To record the entire programme, the unit automatically sets the appropriate recording mode depending on the combination of the total time of the programme to be recorded and either the remaining disc space or the specified recording time (from
60 minutes to 480 minutes when using 4.7 GB blank media disc).8 To record the entire programme within the actual |
Receiving Stereo And Bilingual Programmes
Your unit is equipped with a
When the channel is changed, the type of broadcast being received will be displayed on the TV screen for a few seconds.
Type of Broadcast Beingremaining disc space |
●Note that this function is available only for timer programming recording (A pg. 49, 50).
8To record the entire programme by specifying the desired recording timeSelect
8To record a 25 min. long daily programme five times just on the same DVD disc for example
Perform ASHOWVIEW Timer ProgrammingB (A pg. 49) procedure. Be sure to set the recording mode to AFR125B and set Weekly/ Daily Rec Function to
A: 1st
BlankB: 2nd
C: 3rd
D: 4th
E: 5th
When the same programme is recorded in SP mode instead of in AFR125B, the 5th programme cannot be recorded.
A: 1st
BlankB: 2nd C: 3rd
D: 4th
E: Blank (20 min.)
●You can programme this unit to timer record, regardless of the disc remaining time. When the disc remaining time is not enough, it is not possible to record until the end of the timer programme. Check the disc remaining time before performing timer programming.
(Example) If you programmed to
●The maximum recording time of FR (JUST) mode is the same as the recording time of FR480 mode. When timer programming a long programme in FR (JUST) mode on a disc whose remaining time is short, it is recommended to check the disc remaining time in FR480 mode to see if the remaining time is enough for the programme.
●Even if more than one programme are timer programmed in FR (JUST) mode, only the first one is recorded.
●In order to ensure that the recording fits on the disc, this feature may leave a slight
●There may be some noise and sound disturbance at the point on the disc where the unit switches the mode.
●ASUPERIMPOSEB must be set to AAUTOB. Otherwise the on- screen displays will not appear. (A pg. 75)
●If the quality of stereo sound being received is poor, the broadcast might be received in monaural with better quality.
Selection Of The Audio Channel To Be Recorded On A Disc
When a programme is recorded on a
Before playing back a programme recorded in stereo, or a bilingual programme, refer to AAudio Channel SelectionB (A pg. 31).
41