On-screen Message
DISC NOT REGISTERED IN THE LIBRARY REGISTER DISC?●A disc that is not registered in the library has been inserted. Register the disc as necessary. (A pg. 63)
INSERT DISC #XXXX●Appears when a title that has been selected in the library is not contained in the loaded disc.
CAN NOT RECORD OR MAKE PLAY LIST
DELETE UNWANTED TITLES●Recording and/or editing cannot be performed.●The number of titles exceeds 99.●The number of play lists exceeds 99.SET CLOCK BEFORE TIMER PROGRAMMING●To set the timer programme, the clock must be set in advance. (A pg. 82)PROGRAMME FULLDELETE UNWANTED TIMER PROGRAMME●You can programme this unit to timer record as many as8 programmes. To programme more, you need to cancel a timer programme already set. (A pg. 53)
INSERT RECORDABLE DISC●When a
●A disc loaded cannot be played back on this unit since the region number of the disc does not match that of the unit. (A pg. 3)
UNREADABLE DISCCHECK DISC●When an incompatible disc is loaded, I has been pressed. (A pg. 2)CHECK THE DISC●Formatting is not complete since the disc may be dirty or damaged. Take out the disc, clean it and retry. (A pg. 6, 83)
PRESS [STOP] AGAIN TO STOP RECORDING●During Live Memory playback, o has been pressed. (A pg. 32)TIMER RECORDING COMPLETED●Timer recording has finished during Live Memory playback.PLAYBACK WILL STOP THEN TIMER RECORDING WILL START●Timer recording finished during Live Memory playback, then the next timer recording is about to begin while playback continues.
COPY PROHIBITEDCAN NOT RECORD●An attempt has been made to record●An attempt has been made to record
●The unit has detected invalid contents at the start or in the middle of playback.
THE i.LINK DEVICE THAT YOU HAVE CONNECTED IS NOT RECOGNIZED
MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY AND POWERED ON●An attempt has been made to start DV dubbing when a digital video camera is not properly connected to the unit.
●Check the connection. (A pg. 65)MEMORY IS FULLNOTHING MORE CAN BE REGISTERED IN THE LIBRARY
IF YOU DELETE UNNECESSARY TITLE INFORMATION,YOU CAN THEN REGISTER ADDITIONAL INFORMATION
●The memory for registration for the Navigation system is full. The recording cannot be started even though the capacity for the recording is enough.
AVAILABLE MEMORY IS LOW●The remaining capacity of the memory is not enough for registration for the Navigation system. The recording cannot be started even though the capacity for the recording is enough.
CAN NOT SET DISC TIMER PROGRAMMING WITH THIS DISC
PREPARE A FORMATTED DISC AS DESCRIBED BELOW
●
●
●To set the timer programme using the SHOWVIEW system, the Guide Programme Number must be set in advance.
CAN NOT SET SHOWVIEW TIMER PROGRAMMING DURING TIMER RECORDING OR INSTANT TIMER RECORDING
CANCEL TIMER RECORDING OR INSTANT TIMER RECORDING, THEN ENTER THE SHOWVIEW CODE AGAIN
●Appears when you tried to input a SHOWVIEW number during timer recording or instant timer recording.
COULD NOT FINALISE THE DISC●Finalising is not complete since the disc may be dirty or damaged. Take out the disc, clean it and retry.
COULD NOT CANCEL DISC FINALISATION CHECK THE DISC●Cancelling disc finalisation is not complete since the disc may be dirty or damaged. Take out the disc, clean it and retry.
89