JVC Mode Set, AUDIO OUTPUT, 8ANALOG AUDIO OUT ^ STEREO / DOLBY SURROUND, DVD SET UP, FUNCTION SET UP, INITIAL SET UP, NORMAL:, 8OUTPUT LEVEL ^ STANDARD / LOW, LOW:

SUBSIDIARY SETTINGS

Mode Set

●Turn on the unit.

●Turn on the TV and select an input mode such as EXT1.

●Set the remote control selector switch to AUDIO.

●Press DVD on the remote control.

DVD

1	2	3
4	5	6	AUDIO
			TV
7	8	9	SAT
	0

* The boldface settings below indicate the settings at your purchase.

AUDIO OUTPUT

8ANALOG AUDIO OUT ^ STEREO / DOLBY SURROUND

Select the appropriate setting to accommodate the unit to the connected A/V equipment. This function takes effect when a DVD VIDEO disc is played back.

STEREO:

Select this when listening to conventional two-channel stereo audio with the unit’s [AUDIO OUTPUT] and [L-1 INPUT/ OUTPUT] connectors connected to a stereo amplifier/receiver or TV set, or in case you want to record the audio from a DVD VIDEO disc to a Mini Disc, etc.

DOLBY SURROUND:

Select this when listening to audio with the unit’s [AUDIO OUTPUT] and [L-1 INPUT/OUTPUT] connectors connected to an amplifier/receiver with a built-in surround decoder or a surround decoder.

VOL Selection Keys

(FGDE)

ENTER

SET UP

Various modes of this unit are categorised into menus nested in 2 levels shown in the following table. To change the settings of these modes, find the desired mode in the menu, then follow the procedure below. (For details on each menu, see pages 74 - 76)

DVD SET UP	LANGUAGE SET (A pg. 20)
	AUDIO OUTPUT (A pg. 74)
	UTILITY (A pg. 83, 84)
FUNCTION SET UP	VIDEO IN/OUT (A pg. 21, 69, 70)
	RECORDING SET (A pg. 75)
	DISPLAY SET (A pg. 75)
	OTHERS (A pg. 76)
INITIAL SET UP	AUTO CH SET (A pg. 17, 18, 79)
	MANUAL CH SET (A pg. 80)
	GUIDE PR (A pg. 78)
	CLOCK SET (A pg. 82)

●The procedure below shows how to set the desired option of the AAUDIO RECB mode as an example.

1Press SET UP to access the Main Menu screen.

2Press selection keys to select AFUNCTION SET UPB, then press ENTER.

8D. RANGE CONTROL ^ NORMAL / WIDE RANGE / TV MODE

The dynamic range (the difference between the loudest sound and the quietest one) can be compressed during playback of a programme encoded in Dolby Digital format.

This function takes effect when a DVD VIDEO disc recorded in Dolby Digital format is played back at low or middle volume.

NORMAL:

Normally select this setting to activate this function.

WIDE RANGE:

Select this to deactivate this function when you enjoy wide dynamic range programme.

TV MODE:

Select this when connecting to a TV. Even soft sound can be well heard.

NOTES:

●This function has no effect on programmes other than those recorded in Dolby Digital format.

●The effect of ANORMALB and AWIDE RANGEB may not be different depending on discs.

8OUTPUT LEVEL ^ STANDARD / LOW

You can lower the output level of analogue audio to accommodate the unit to the connected A/V equipment.

STANDARD:

Normally select this setting.

LOW:

The output level of analogue audio is lowered.

3Press selection keys to select ARECORDING SETB, then press

ENTER.

4Press selection keys to select AAUDIO RECB, then press ENTER.

5Press selection keys to select the desired setting, then press

ENTER.

DVD SET UP	FUNCTION SET UP INITIAL SET UP
VIDEO IN/OUT	RECORDING SET	DISPLAY SET	OTHERS
SAVE AS LIBRARY		ON
XP MODE REC AUDIO		DOLBY DIGITAL
AUDIO REC		NICAM1/MAIN
DIRECT REC		NICAM1/MAIN
		NICAM2/SUB
INPUT COLOUR SYSTEM			MONO
SET UP	OK	SELECT WITH [CURSORS]
EXIT	SELECT	THEN PRESS [ENTER]

6Press SET UP to complete the setting.

74