INSTALLING YOUR NEW UNIT

This page is for TH-R3

Assembling The Front And Surround Speakers

The following procedure explains the front speaker assembly. The assembly of both the front and surround speakers are done in the same manner.

Front speaker

Surround speaker

Stand (x4)

(x2)

(x2)

 

Before assembling^●Prepare a Phillips screwdriver (not supplied).

●Take care not to drop any component part while assembling; otherwise, it may cause damage to the floor or injury.

1

Red WhiteBlackBlackStand

2

Speaker

Stand

3

Red White

Black

Black

Speaker

Stand

Screw (supplied)

 

When installing the front and surround speakers on the wall;

●Attach the supplied bottom cover on the bottom of each speakers as illustrated.

Bottom cover●Be sure to have them installed on the wall by a qualified personnel.

●DO NOT install the satellite speakers on the wall by yourself to avoid unexpected damage from their falling off the wall due to incorrect installation or weakness in wall structure.

●Care must be taken in selecting a location for speaker installation on a wall. Injury to personnel or damage to equipment may result if the speakers installed interfere with daily activities.

●If attaching the stand to the speaker, remove the bottom cover by inserting a flat-pointed tool into the hole of the bottom cover.

13