TIMER RECORDING
Check, Cancel And Change Programmes
|
|
|
| AUDIO A |
|
|
|
| TIMER j |
1 | 2 | 3 |
|
|
PROG |
|
|
|
|
4 | 5 | 6 |
| AUDIO |
|
|
|
| TV |
7 | 8 | 9 |
| SAT |
CANCEL | 0 |
|
|
|
SHOWVIEW/ |
|
|
|
|
VIDEO Plus+ |
|
|
| SAT j |
|
|
|
| |
|
|
|
| Selection Keys |
|
|
| VOL | (FGDE) |
|
|
|
| ENTER |
|
|
|
| CLEAR (o) |
1Disengage the timer mode.
● When | lights up on the front display panel, press AUDIO |
A. |
|
●When j lights up on the front display panel, press TIMERj, and press AUDIO A after j lights off.
●When ASAT jB lights up on the front display panel, press SATj.
2Press PROG to access the Programme Check screen.
●To return to the previous screen after you check the programme, press PROG again.
To cancel the programme●Press selection keys to select a programme to be cancelled, then press CANCEL.
3Press selection keys to select a programme to be changed, then press ENTER.
4Change the settings of the desired recording options as required.
●Refer to steps 4 - 10 in Manual Timer Programming.
5Press PROG to exit the programme screen.
6Set the unit to timer standby mode.
For SHOWVIEW or Manual Timer Programming●Press TIMERj so that j lights up on the front display panel.
For●Press AUDIO A so that lights up on the front display panel.
For Automatic Satellite Programme RecordingWhen Programmes Overlap Each Other
If APROGRAMME OVERLAPPEDB appears, you have another programme overlapping the programme you have just made. Press PROG. Programme Check screen appears and conflicting programmes will be highlighted in pink.
Example: Programme 3(you have just made) and | PROGRAMME CHECK |
|
|
| ||
DATE | TV PROG DAILY/WEEKLY VPS/PDC REC MODE | |||||
Programme 4 overlap | ||||||
05/07 SAT | ON | SP | ||||
each other. | ||||||
06/01 THU | ON | SP | ||||
| 10/07 THU | 7 WEEKLY | OFF | XP | ||
| 10/07 THU | 7 | OFF | LP | ||
| ++++++++++++++++++ NEW TIMER PROGRAMME ++++++++++++++++++ | |||||
1 Confirm the overlapping |
| DISC TIMER PRGM |
|
| ||
programmes. | EXIT | OK | SELECT WITH [CURSORS] |
| ||
PROG | SELECT | THEN PRESS [ENTER] |
|
| ||
|
|
| ||||
|
|
|
|
|
●If you do not mind this overlap, press PROG to finish the timer programme setting.
●Recording is performed according to the order as displayed on the Programme Check screen. The timer programme that follows will not be performed correctly.
To cancel the programme
Press selection keys to select a programme to be cancelled, then press CLEAR(o).
●ATHE TIMER PROGRAMMING SETTING WAS CANCELLEDB appears on the TV screen for about 5 seconds, then the normal screen resumes.
To change the programmePress selection keys to select a programme to be changed, then press ENTER.
●Change each setting as required.
2Press ENTER to exit the Programme screen.
3Press TIMERj to enter into timer standby mode.
When any overlaps remain after deletion and modification of programmes, Programme Overlap list remains showing the conflicting programmes. In such a case, repeat the procedure above until the conflict is solved.
53