TIMER RECORDING

To Timer Record The Programme With The Programmed Disc

1Load a programmed disc.

2Press AUDIO A to turn off the power.

appears on the front display panel, and the unit enters into timer standby mode.

To disengage the timer mode, press AUDIO A again.

NOTES:

On-Disc Timer Programming is not possible on a DVD-R or DVD- RW (Video mode) disc.

The information of a programme recorded with On-Disc Timer Programming is not stored in the library.

The play list is not created for the programmes recorded with On- Disc Timer Programming.

Programmes recorded with On-Disc Timer Programming cannot be edited or protected.

On-Disc Timer Programmed discs cannot be used for other recordings other than On-Disc Timer Programming.

On-Disc Timer Programmed discs cannot be used on units from other manufacturers.

The beginning of a programme may not be recorded. In addition, if the 1st programme’s recording stop time and the 2nd programme’s recording start time is the same, the ending of the 1st programme may not be recorded.

If there is a power outage while recording, the recordings when the power outage occurs are not guaranteed.

TV DIRECT mode is activated when the unit turns on automatically during timer recording.

How Discs Are Overwritten

(Example 1)To record a 1-hour serial drama every Friday in SP mode

Blank

1st

2nd

1st

2nd

3rd

4th

3rd

The first programme is

The second programme is

overwritten by the third.

overwritten by the fourth.

(Example 2)To record a 15-minutes serial drama every morning in XP mode

4th

1st

8th

5th

12/6

12/3

12/10

12/7

3rd

2nd

7th

6th

12/5

12/4

12/9

12/8

(Example 3)To record a 90-minutes serial drama every Sunday in SP mode

2nd

Blank

1stBlank

3rd

Areas treated as blank cannot

 

be played back even if they

 

contain recorded material.

Blank

 

NOTES:

On-Disc Timer Programming may not always work as these examples.

On-Disc Timer Programming may not complete successfully if the recording stop time is extended due to VPS/PDC.

52