JVC Preset Download, ASCAN, resumes, performed, COMPLETEDB, normal screen, ● When T-VLINK, screen for about, appears on the TV, seconds, then the

INITIAL SET UP

INITIAL SET UP / CHANNEL SET

AUTO SET

T-V LINK

INITIAL SETTINGS

Preset Download

Auto Channel Set by Downloading from TV/Auto Clock Set/Auto Guide Programme Number Set

ATTENTION:

You can use this function only with a TV offering T-V Link, etc.* Be sure to use a fully-wired 21-pin SCART cable.

*Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART cable. The degree of compatibility and available functions may differ by system.

AUDIO A

1 2 3

4 5 6

7 8 9

If you have connected the unit to your TV via a 21-pin SCART cable (A pg. 11), the unit will automatically perform Preset Download instead of the AAuto Set UpB in step 4 on page 17. After downloading, the unit sets the clock and Guide Programme numbers automatically.

●Perform steps 1 to 3 of AAuto Set UpB (A pg. 17) before continuing.1Press selection keys to select AT-V LINKB, then press ENTER for confirmation.●T-V LINK setting is

performed.	INITIAL SET UP
	INITIAL SET UP / CHANNEL SET
● When T-V LINK
setting is completed,	AUTO SET
ASCAN	T-V LINK
COMPLETEDB
appears on the TV
screen for about 5
seconds, then the	SET UP	OK	SELECT WITH [CURSORS]
normal screen
	RETURN	SELECT	THEN PRESS [ENTER]
resumes.

0

PR +/-

VOL	Selection Keys
	(FGDE)
	ENTER

		PLEASE WAIT...
SET UP	OK		SELECT WITH [CURSORS]
RETURN	SELECT		THEN PRESS [ENTER]

ATTENTION:

Preset positions on the front display panel increase from

APR1B…APR3B…; do NOT press any button on the unit or remote control until the front display panel shows clock time, APR1B or A- - : - -Bas illustrated on page 19.

●If you press any button on the unit or remote control while downloading is in progress, it will be interrupted.

NOTES:

●For details, refer to the instruction manual of your TV.

●In areas where no TV station transmits a PDC (Programme Delivery Control) (A pg. 50) signal, the unit can perform neither Auto Clock Set nor Auto Guide Programme Number Set.

●If there is a power cut, or if you press A or SET UP while downloading or set up is in progress, it will be interrupted. Be sure to turn off the unit power once and try again from the beginning.

●Auto Clock Set may not function properly depending on the reception condition.

●On this unit, the characters available for station names (ID) are A–Z, 0–9, –, Z, + and & (space). Some names of downloaded stations may differ from those of your TV. (A pg. 81)

After APreset DownloadB is completed, perform AMonitor SetB (A pg. 21).

18