MONO
AUTO
Normally select this.
Stereo sound will be heard during stereo broadcast, and monaural sound during monaural broadcast.
This mode is also useful to suppress static noise between stations.
Select this to improve the reception. (However, stereo will not be effective.)

BASIC OPERATIONS ON DVD DECK

Receiving Radio Broadcasts

You can enjoy radio broadcasts by browsing through all the stations or using the preset memory function.

●Turn on the unit.

●Set the remote control selector switch to AUDIO.

●Press FM/AM on the remote control.

FM/AM

1 2 3

4 5 6

0-9

7 8 9

PR +/-

0

MEMORY

AUDIO

TV

SAT

ENTER VOL

TUNING +/–

FM MODE

There is a time limit when performing the following setting. If the time is up before completing the setting, re-perform from the

Preset Memory - Store Memory

Once a station is assigned to a channel number, the station can be quickly tuned in. You can preset up to 30 FM and 15 AM stations.

1Tune in to the station you want to preset.

2

Press MEMORY.

FM__CH 87.80

 

The preset number blinks on the

 

front display panel.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blinking

 

3

While blinking, press the number

FM 1CH

87.80

 

keys or PR +/– to set the preset

 

number.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blinking

4

Press MEMORY.

FM 1CH

87.80

 

87.80 MHz is assigned to FM1.

NOTES:

●If no operation is carried out within 5 seconds when the display is blinking, the preset will not be stored and the display changes back to its original frequency.

●When you have entered an input beyond the range using the number keys, the preset number will return to 1 if you press PR +/–.

●Pressing the + and – key of PR +/– increases and decreases the preset number by 1 respectively.

Preset Tuning

Press the number keys or PR +/– to tune to the station stored to the preset number.

●Number keys Can specify the preset number directly.
● PR +/–

Gradually increases or decreases the preset

 

number by 1 from the preset number of the

 

current reception.
To call up preset number 3
beginning.

Tuning In To Stations Manually

1Press FM/AM to select the band.Each time you press the button, the band switches between FM and AM.2Press TUNING +/– (S or T) until the desired station is located.
1Press the number key A3B orPR +/– to set to preset number 3.

●The preset number blinks for a few seconds before lighting up. The preset number is fixed once it lights up.

Switching The FM Mode

FM 3CH108.00

Blinking

FM 3CH 88.60

NOTES:

●A short press on S or T changes the frequency in 1 step FM 0.05 M/AM 9 K interval.

●Press and hold S or T to change the frequency rapidly.●To auto tune stations, press S or T for a while then release.

●ATUNEDB lights on the front display panel when a station with sufficient signal strength is tuned.

●ASTB lights on the front display panel when a FM stereo programme is received.

●You can also press SOURCE on the front panel to select the desired band in step 1.

When an FM stereo broadcast is hard to receive or noisy, you can change the FM reception mode while receiving an FM broadcast.

●You can set the FM reception mode for each preset station.1Press FM MODE during FM reception.

Each time you press the button, the FM reception switches between AAUTOB and AMONOB.

● MONO Setting● AUTO SettingAUTO MUTINGMONO

44