SUBSIDIARY SETTINGS

Scan Mode Set

If you connect the unit and TV with Component Video Connection (A pg. 7), you can select the scan mode from two modes: Interlaced scan mode which is used in the conventional TV system, and Progressive scan mode which enables reproduction of higher quality images.

8Interlaced scan

In the conventional video system, a picture is shown on the display monitor in two halves. The Interlaced scan system places lines of the second half of the picture in-between lines of the first half of the picture.

8Progressive scan

Progressive scan displays all the horizontal lines of a picture at one time, as a single frame. This system can convert the interlaced video from DVD into progressive format for connection to a progressive display. It dramatically increases the vertical resolution.

ATTENTION:

●Your TV needs to be compatible with Progressive.

●Connect the unit and the TV using a component video cable.

●Turn on the unit.

●Turn on the TV and select an input mode such as EXT1.

●Set the remote control selector switch to AUDIO.

●Press DVD on the remote control.

AUDIO A

DVD

1 2 3

4

5

6

AUDIO

 

 

 

TV

7

8

9

SAT

 

0

 

 

VOL

PROGRESSIVE SCAN

1Set AL-1 OUTPUTB to ACOMPONENTB. (A pg. 69)

2Press PROGRESSIVE SCAN for 3 or more seconds.

●Video output indicator (q) lights on the front display panel if Progressive scan mode has been established. (A pg. 8)

●Each press of PROGRESSIVE SCAN for 3 or more seconds switches the scan mode.

NOTES:

●Progressive scan video signal is output from the [COMPONENT VIDEO OUT] connectors.

●Interlaced scan mode is the setting at your purchase.

●Interlaced scan mode might be suitable depending on video material.

●Scan mode cannot be set while menu screen is displayed.

Tray Lock

You can lock the disc tray to prohibit the unwanted disc ejection by children.

M o

To lock tray

When the unit is turned off, while holding o, press M on the unit. ALOCKB appears on the front display panel and the disc tray is locked.

To unlock tray

When the unit is turned off, while holding o, press M on the unit. AUNLOCKB lights up on the front display panel.

77