JVC Auto Set Up, INITIAL SETTINGS, ENTER, 2 Press selection keys, Before starting, make sure of the following:, AcB, AUTO, LINK, page, Press, . The, SET/T-V

INITIAL SETTINGS●If you have selected any other country name, go to step 4.

3Press selection keys to select the language of your choice, then press ENTER. The AUTO SET/T-V LINK display appears on the TV screen.

4Press selection keys to select AAUTO SETB, then press ENTER.●Auto Channel Set is performed.●When Auto Channel Set is completed, ASCAN COMPLETEDB appears on the TV screen.

ATTENTION:

AAUTOB blinks on the front display panel; do NOT press any button on the unit or remote control until the front display panel shows clock time, APR1B or AcB as illustrated on

INITIAL SET UP

INITIAL SET UP / LANGUAGE SET

ENGLISH	DEUTSCH	FRANCAIS	ITALIANO
ESPAÑOL	NEDERLANDS	SVENSKA	NORSK
SUOMI	DANSK
SET UP	OK	SELECT WITH [CURSORS]
RETURN	SELECT	THEN PRESS [ENTER]

INITIAL SET UP

INITIAL SET UP / CHANNEL SET

AUTO SET

T-V LINK

SET UP	OK	SELECT WITH [CURSORS]
RETURN	SELECT	THEN PRESS [ENTER]

INITIAL SET UP

INITIAL SET UP / CHANNEL SET

AUTO SET

AUTO SET

T-V LINK

PLEASE WAIT...

Auto Set Up

Auto Channel Set/Auto Clock Set/Auto Guide Programme Number Set

After the A button on the unit (or AUDIO A on the remote control) is pressed for the first time to turn on the unit, by simply selecting your country*, the Auto Set Up function sets the tuner channels, clock** and Guide Programme numbers automatically.

*If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also need to select your language.

**If you live in Hungary (MAGYARORSZÁG), Czech Republic (ČESKÁ REPUBLIKA), Poland (POLSKA) or other countries in Eastern Europe (OTHER EASTERN), set the clock manually.

1

			AUDIO A
1	2	3
4	5	6	AUDIO
			TV
7	8	9	SAT
	0
		VOL	Selection Keys

(FGDE)

ENTER

Before starting, make sure of the following:●The TV aerial cable should be connected to the unit.

●The unit’s mains power cord should be connected to a mains outlet.

●Turn on the TV and select an input mode such as EXT1.●Set the remote control selector switch to AUDIO.●Press DVD on the remote control.

1Press A on the unit or AUDIO A on the remote control to turn on the unit. The Country Set display appears on the TV screen.

2 Press selection keys	INITIAL SET UP
to select your country’s	INITIAL SET UP / COUNTRY SET
name, then press
ENTER.
NOTES:
● If you have selected
ABELGIUMB or ASUISSEB,
go to step 3.	SET UP	OK	SELECT WITH [CURSORS]
● If you have selected
		SELECT	THEN PRESS [ENTER]
AMAGYARORSZÁGB,	EXIT

AČESKÁ REPUBLIKAB,

APOLSKAB or AOTHER EASTERNB, press ENTER, the Clock Set screen appears. Set the clock manually (A pg. 82), then go to step 4.

page 19.
	CANCEL

●When you have

connected the unit to a TV	SET UP	OK	SELECT WITH [CURSORS]
offering T-V Link via a
	RETURN	SELECT	THEN PRESS [ENTER]
fully-wired 21-pin SCART

cable (A pg. 11) and the TV is turned on, the unit automatically performs the Preset Download (A pg. 18) even if you select AAUTO SETB for Auto Set Up function.

ATTENTION:

Once you have performed AAuto Set UpB, even if the unit’s memory backup has expired, all the stored stations and their Guide Programme numbers remain in the unit’s memory and the unit will not perform AAuto Set UpB again. Perform clock set manually after turning on the unit. (A pg. 82)

If you have moved to a different area, perform each setting as required.

●TV Tuner setting (A pg. 79)●Clock setting (A pg. 82)

If a new station starts broadcasting in your area, perform TV tuner setting. (A pg. 79)

NOTES:

●In areas where no TV station transmits a PDC (Programme Delivery Control) (A pg. 50) signal, the unit can perform neither Auto Clock Set nor Auto Guide Programme Number Set.

●If there is a power cut, or if you press A or SET UP while AAuto Set UpB is in progress, AAuto Set UpB will be interrupted. Be sure to turn off the unit power once and try again from step 1.

●Auto Clock Set may not function properly depending on the reception condition.

●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by AAuto Set UpB, the TV system setting for those channels may be incorrect. Select the appropriate TV system for those channels. (A pg. 80,

AINFORMATIONB)After AAuto Set UpB is completed, perform AMonitor SetB

(A pg. 21). If you need to set the language, refer to ALanguageB on page 20 before proceeding to perform AMonitor SetB.

17