JVC On-DiscTimer Programming, To Make The Disc For On-DiscTimer Programming, PROG, ENTER, ENTER, ENTER, ENTER, AUDIO, AUDIO, selection keys, selection keys

DISC TIMER PRGM

TIMER RECORDING

On-Disc Timer Programming

On-Disc Timer Programming is a function used with discs that are especially intended for a specific programme. The disc is then programmed for a programme you always watch every day or every week. Since older programmes are automatically overwritten, a single disc can be used without worrying about how much recording capacity remains. You can programme each disc to timer record as many as 8 programmes up to 30 days in advance.

●Make sure that the unit’s built-in clock is set properly.

●Turn on the TV and select an input mode such as EXT1.

●Load a DVD-RAM or DVD-RW (VR mode) disc for programming.

ATTENTION:

●On-Disc Timer Programming is possible only with the disc for On-Disc Timer Programming.

●If data is recorded on a disc for On-Disc Timer Programming using a unit from another manufacturer, On-Disc Timer Programming may not function properly.

DVD			AUDIO A
1	2	3
PROG	5	6
4			AUDIO
			TV
7	8	9	SAT
	0
		VOL	Selection Keys

(FGDE)

ENTER

To Make The Disc For On-Disc Timer Programming

1	Press PROG to access
	the Programme Check	PROGRAMME CHECK
	screen.	DATE	START-STOP	TV PROG	DAILY/WEEKLY	VPS/PDC	REC MODE
2	Press selection keys to	++++++++++++++++++ NEW TIMER PROGRAMME ++++++++++++++++++

select ADISC TIMER PRGMB, then press

ENTER.

●When some

programmes are		DISC TIMER PRGM
	EXIT	OK	SELECT WITH [CURSORS]
recorded on the disc, a	PROG	SELECT	THEN PRESS [ENTER]

caution message

appears. You can either format the disc (A pg. 83) or insert a new disc, then re-perform the procedure from step 1.

●When On-Disc Timer Programming has already been made on the disc, press selection keys to select ANEW TIMER PROGRAMMEB, then press ENTER.

3Press selection keys to

set the desired date

(ADATEB), then press E.

4 Press selection keys to	DATE	START	STOP	TV PROG
	05/07 SAT
set the desired start time
(ASTARTB), then press E.	DAILY/WEEKLY	VPS/PDC	REC MODE	NAME
● Each press of FG	WEEKLY	OFF
			LP
increases/decreases the
start time in 1 minute	EXIT	CONFIRM SET TIMER PROGRAMMING WITH [CURSORS]
interval.	PROG	SELECT	THEN PRESS [ENTER]

●To increase/decrease the

start time in 30 minutes interval, press and hold FG.

5Press selection keys to set the desired stop time (ASTOPB), then press E.

●Each press of FG increases/decreases the stop time in 1 minute interval.

●To increase/decrease the stop time in 30 minutes interval, press and hold FG.

6Press selection keys to set the desired channel (ATV PROGB), then press E.

7Press selection keys to set ADAILY/WEEKLYB, then press E.

●For details on ADAILY/WEEKLYB setting, refer to ADaily/Weekly Recording FunctionB (A pg. 49).

8Set the other recording

options as required. DISC TIMER PRGM

●AVPS/PDC RecordingB

(A pg. 50)	DATE	START	STOP	TV PROG
● ARecording ModeB	05/07 SAT	18:30	20:30	YORN 1
(A pg. 39)
● AModify Title NameB	DAILY/WEEKLY	VPS/PDC	REC MODE	NAME
	WEEKLY	ON	LP
(A pg. 58)
9 Press ENTER to access	EXIT	CONFIRM SET TIMER PROGRAMMING WITH [CURSORS]
the Programme	PROG	SELECT	THEN PRESS [ENTER]

Confirmation screen.

10 Press ENTER to complete ATo Make The Disc For On-Disc Timer ProgrammingB.

●To programme another timer using ATo Make The Disc For On- Disc Timer ProgrammingB, repeat steps 1 - 10.

11 Press AUDIO A to turn off the power.

● is displayed on the front display panel.

●To disengage the timer mode, press AUDIO A again.

Satellite Receiver Users

To timer record a satellite broadcast using On-Disc Timer Programming:

APerform On-Disc Timer Programming.

BSet the satellite receiver to the appropriate channel for recording.

●Leave the satellite receiver’s power on.

51