SYSTEM CONNECTIONS
TV Brand Code Table
BRAND NAME | CODE |
|
|
JVC | 01, 23, 24, 25 |
FERGUSON | 27 |
FINLUX | 30 |
FUNAI | 32 |
LG/GOLDSTAR | 18 |
GRUNDIG | 19 |
HITACHI | 10 |
ITT | 28 |
MITSUBISHI | 03 |
MIVAR | 29 |
NEC | 20 |
NOKIA | 31 |
PANASONIC | 04, 11 |
PHILIPS | 02 |
RCA | 05 |
SAMSUNG | 12, 33, 34, 35 |
SANYO | 13, 16 |
SHARP | 06 |
SONY | 07 |
THOMSON | 26 |
TOSHIBA | 08, 14 |
|
|
Satellite Receiver
Your Remote can operate the basic functions of your satellite receiver set. In addition to JVC satellite receivers, other manufacturer’s satellite receivers can also be controlled.
Slide the AUDIO/TV/SAT switch to SAT.SATA
1 2 3
4 5 6
7 8 9
1Keep pressing SET UP down during step 2.
2Enter your satellite receiver’s brand code using the number keys, then press ENTER.
3Press SATA on the unit’s Remote to turn on the SAT receiver and try operations.
●Once you have set the Remote to operate the satellite receiver, you do not have to repeat this step until you replace your Remote’s batteries.
●Some brands of satellite receiver have more than one code. If the satellite receiver does not function with one code, try entering another.
8Operate the satellite receiver.1Press the corresponding button: SATA, PR●For some brands of satellite receiver, you must press ENTER after having pressed the number keys.
●The number keys may not function with some satellite receivers.Satellite Receiver Brand Code Table
BRAND NAME | CODE |
|
|
JVC | 72, 73 |
AMSTRAD | 60, 61, 62, 63, 92 |
CANAL + | 81 |
85 | |
ECHOSTAR (VIA DIGITAL) | 82 |
FINLUX | 68 |
FORCE | 89 |
GALAXIS | 88 |
GRUNDIG | 64, 65 |
HIRSCHMANN | 64 |
ITT NOKIA | 68 |
KATHREIN | 70, 71 |
LUXOR | 68 |
MASCOM | 93 |
MASPRO | 70 |
NOKIA | 87 |
PACE | 67, 86, 92 |
PANASONIC | 13, 14, 74 |
PHILIPS | 66, 84 |
RFT | 69 |
0
PR +/-
SAGEM | 83 |
SALORA | 68 |
SAMSUNG | 05, 24 |
AUDIO
TV
SAT
ENTER VOL
SET UP
Although the supplied Remote unit is compatible with JVC satellite receivers, as well as many other models, it may not work with your satellite receiver, or in some instances, may have limited function capability.
SKYMASTER | 69 |
TPS | 83 |
TRIAX | 91 |
WISI | 64 |
●You must set the satellite receiver brand for your Remote and the satellite receiver brand for your Controller separately.
●It’s not possible to operate a satellite receiver that is not equipped with a remote sensor.
●It’s not possible to set the Remote for both your satellite receiver and a cable box at the same time. You can only set the Remote to operate one of these units at a time.
73