INSTALLING YOUR NEW UNIT

Connecting The Satellite (Front, Centre, Surround) Speakers

Before connecting the speaker cords;Twist and pull the insulation coat off and remove.
TH-R14 mSpeaker cord

 

 

 

 

 

 

 

 

 

 

 

Connect the black cords to the black (G) terminals.

 

 

 

Connect the white cords to the (F) terminals

 

 

 

 

referring to the table below:

 

 

 

Front speakersFRONT SPEAKERS (LEFT)

White

 

 

FRONT SPEAKERS (RIGHT)Red

 

 

SP-THS55F

 

 

 

CENTRE SPEAKERGreen

4

16

 

SURROUND SPEAKERS (LEFT)Blue

 

 

 

 

 

 

SURROUND SPEAKERS (RIGHT)Grey
Powered subwoofer SP-PWR1

 

 

 

 

4 m

 

 

 

 

 

 

Surround speakers

 

 

 

 

SP-THS55S

 

Centre speaker SP-THS55C10 m

 

 

The satellite speakers are equipped with their speaker cords attached directly to their speaker unit instead of having speaker terminals on their cabinet.

TH-R3

 

 

 

 

Centre speaker
Powered subwoofer

4 16

SP-THS66C

 

White

SP-PWR3

 

 

 

Black

 

 

4 m

 

 

Red

 

 

Black

Front speakers

 

Surround speakers

 

SP-THS66S
SP-THS66F

 

 

 

4 m

10 m

CAUTIONS:

When you connect speakers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPEDANCE) indicated near the speaker terminals on the rear of the powered subwoofer.

DO NOT connect more than one speaker to one speaker terminal.
Precautions for daily use

When moving the speakers, do not pull the speaker cords; otherwise, the speakers may fall over, causing damage or injury.

Do not reproduce sounds at so high a volume that they are distorted; otherwise, the speakers may be damaged by internal heat build-up.

When holding a speaker, always grasp the lower portion. (TH-R3)

Do not lean against the speakers, as the speakers could fall down or break, possibly causing an injury. Especially make sure that children do not lean against them. (TH-R3)

14