BASIC OPERATIONS ON DVD DECK

Adjusting The Volume

●Turn on the unit.

●Turn on the TV and select an input mode such as EXT1.

●Set the remote control selector switch to AUDIO.

●Press DVD on the remote control.

DVD

1

2

3

 

4

5

6

AUDIO

 

 

 

TV

7

8

9

SAT

 

0

 

 

VOL

VOL +/–

SHIFT

Speaker output

adjustment buttons

There is a time limit when performing the following setting. If the time is up before completing the setting, re-perform from the beginning.

Adjusting The Volume

The volume is always set to the lowest level before operation starts no matter what source (sound source) is to be played back.

If the volume is set at its high level, the sudden blast of sound energy may impair your hearing or damage your speakers.

Press VOL +/– on the remote control.+: To increase the volume. - : To turn down the volume.
Adjusting The Output Level Of Each Speaker
Adjust with the speaker output adjustment buttons for each speaker.●Press CENTER +/– to adjust the centre speaker.●Press L +/– to adjust the left front speaker.●Press R +/– to adjust the right front speaker.●Press SHIFT and S. WFR +/– to adjust the subwoofer.●Press SHIFT and SURR. L +/– to adjust the left surround speaker.●Press SHIFT and SURR. R +/– to adjust the right surround speaker.
During HEADPHONE: Not adjustable except for L and R.During TV DIRECT: All speakers not adjustable.

Listening With Headphones

ATTENTION:

Be sure to turn down the volume;

●before connecting or putting on the headphones, as high volume may damage both the headphones and your hearing.

●before removing the headphones, as high volume will result in a full blast from the speakers.

You can enjoy stereo software as well as multi-channel software through the headphones. (Sounds are down-mixed to the front channels while playing multi-channel software.)

Connect the headphones to the headphone jack [PHONES] on the front panel of the centre unit.

●If Surround is activated, A3D H PHONEB lights up for a few seconds and ADSPB lights on the front display panel.

●If Surround is deactivated, AHEADPHONEB lights up for a few seconds on the front display panel.

●When the headphone is inserted, the unit switches between A3D H PHONEB mode and AHEADPHONEB mode each time SURROUND is pressed.

●There is no sound output from the speakers when the headphone is inserted.3D Headphone Mode^3D H PHONEYou can also enjoy the Surround mode through the headphones.

If Surround is activated, 3D headphone mode will be activated regardless of the software type being played.

A3D H PHONEB and ADSPB light on the front display panel.

Speaker

Can be set from -6 dB to

 

+6 dB in 1 dB interval.
●Adjustment cannot be made for speakers whose indication is not lighted.During SURR OFF: C, SL and SR not adjustable.During AUTO SURR (with 2-channel signal input): C, SL and SR not adjustable.

26