EDITING

Edit To Or From Another RecorderYou can use your unit as the source player or as the recording deck.

NOTE:

When using another recorder as the recording deck, refer to its instruction manual.

AWhen using your unit as the source player

 

TV receiver

Player

 

Your unit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

21-pin SCART cable (supplied)

21-pin SCART cable (not supplied)

Another recorder

Recorder

BWhen using your unit as the recording deck

TV receiver

Recorder

 

 

 

Your unit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1Connect another recorder’s 21-pin SCART connector to theunit’s 21-pin SCART connector as illustrated.AWhen using your unit as the source player:^connect its [L-1 INPUT/OUTPUT] connector to the recording deck.BWhen using your unit as the recording deck:^connect its [L-2 INPUT/DECODER] connector to the source player.●If another recorder is compatible with the Y/C signal:

^when using your unit as the source player, set AL-1 OUTPUTB to ASCART S-VIDEOB. (A pg. 69)

^when using your unit as the recording deck, set AL-2 SELECTB to AS-VIDEO/RGBB. (A pg. 70)

2When using this unit as the recording deck, press PR +/– to select AL-2B.●Set AL-2 SELECTB to AVIDEO/RGBB or AS-VIDEO/RGBB. (A pg. 70)

3When using this unit as the recording deck, press REC MODE repeatedly to set the recording mode.

4Engage the Play mode of the source player.5Engage the Record mode of the recording deck.6Stop recording on the recording deck, then stop playback on the source player.

NOTES:

●All necessary cables can be obtained from your dealer.

●For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.

●When you use this unit as the source player for editing, be sure to set ASUPERIMPOSEB to AOFFB before starting. (A pg. 75)

●If you are using another recorder with S-Video and Audio output connectors, connect its S-Video and Audio output connectors to this unit’s [S-VIDEO]and [AUDIO] input connectors on the front panel. Then, set the unit’s input mode to AF-1Bin step 2, and set AF-1 INPUTB to AS-VIDEOB. (A pg. 70)

21-pin SCART cable (supplied)

21-pin SCART cable (not supplied)

Another recorder

Player

68