BASIC OPERATIONS ON DVD DECK

DVD

1

2

3

 

4

5

6

AUDIO

 

 

 

TV

7

8

9

SAT

 

0

 

 

SURROUND

VOL

I

DAP Mode

The sound heard in a concert hall, club, etc. consists of sound directly from the source (direct sound), sound that are reflected from the ceiling and walls (early reflected sound) and sound that are reflected many times (reverberant sound). The sound field in a concert hall etc. is created with these reflected sound/reverberant sound (the delay varies depending on the distance between the listener and the ceiling and walls) and the direct sound.

This system equipped with the DAP mode reproduces realistic sensation of concert halls, clubs etc. through digital signal processing of these reflected sound/reverberant sound.

DAP Mode ListReproduces the acoustic atmosphere ofTHEATER1* a theatre with a seating capacity of about 600 seats.

Reproduces the acoustic atmosphere of

THEATER2* a theatre with a seating capacity of about 300 seats.

Activating The Surround Mode Automatically

The Surround mode is automatically activated when Auto Surround mode has been set (A pg. 27).

Reproduces the acoustic atmosphere of a large shoebox-shaped hall (seating capacity of about 2000 seats) designed mainly for classical concerts.

Reproduces the acoustic atmosphere of a large vineyard-shaped hall (seating capacity of about 2000 seats) designed mainly for classical concerts.

Auto Surround mode reproduces sounds in the form as recorded without any conversion (down mixing, simulation or others). For example, multi-channel recorded software is automatically played back with multi-channel audio.

Reproduces the acoustic atmosphere of a live club with low ceiling.
The available Surround mode changes depending on the input signal.
Reproduces the acoustic atmosphere of a disco.
Auto Surround will also be activated when the input mode
changes from analogue to digital.

Dolby Digital is automatically activated when Dolby Digital multi-

channel signal is input.
Reproduces the acoustic atmosphere of an exhibition hall with high ceiling.

DTS Surround is automatically activated when DTS multi-

channel signal is input.

Analogue And Digital 2-Channel Signal

When playing back analogue and digital 2-channel software, you can press SURROUND to select the desired surround mode manually.

Each time you press the button, the mode switches as follows.

L

R SW

PL

AUTO SURRNPL II MOVIENPL II MUSICNTHEATER1NTHEATER2NHALL1NHALL2NLIVE CLUBNDANCE CLUBNPAVILIONNALL CH STNSURR OFFNAUTO SURRA__B: DAP mode

*The built-in Dolby Pro Logic II decoder is activated when playing back 2-

channel analogue or digital source.

A PL IIB lights up.

NOTE:

You can also enjoy DAP mode with Dolby Digital 5.1CH, DTS and DTS 96/24.

All Channel Stereo (ALL CH ST.)

This mode can reproduce a larger stereo sound field using all the connected (and activated) speakers.

Sound reproduced from All Channel Stereo mode

43