SUBSIDIARY SETTINGS

TV Tuner Set

Your unit needs to memorise all necessary stations in channel positions in order to record TV programmes. Auto Channel Set automatically assigns all receivable stations in your area to call them up by using the PR +/– buttons without going through any vacant channels.

IMPORTANT:

Perform the following steps only if ^

^Auto Channel Set has not been set correctly by Auto Set Up or by Preset Download. (A pg. 17, 18)

^you have moved to a different area or if a new station starts broadcasting in your area.

●Turn on the unit.

●Turn on the TV and select an input mode such as EXT1.

●Set the remote control selector switch to AUDIO.

●Press DVD on the remote control.

DVD

1

2

3

 

4

5

6

AUDIO

 

 

 

TV

7

8

9

SAT

 

0

 

 

Selection Keys

VOL(FGDE)

ENTER

RETURN

SET UP

Auto Channel Set

1Press SET UP to access the Main Menu screen.

2Press selection keys to select AINITIAL SET UPB, then press ENTER for confirmation.

6Press ENTER twice.

●When you have connected the unit to a TV offering T-V Link via a fully-wired 21-pin SCART cable (A pg. 11), the unit automatically performs the Preset Download and the T-V LINK screen will appear. (A pg. 19)

●The Auto Set screen appears, and remains on screen while the unit searches for receivable stations.

7After completing Auto Channel Set, press ENTER.When Auto Channel Set is completed, ASCAN COMPLETEDB appears on screen8Press SET UP to complete the setting.

●Using the Confirmation screen, you can skip or add channel positions, enter station names and perform other operations. Refer to pages 80 - 81 for the procedures.

●Depending on reception conditions, the stations may not be stored in order, and the station names may not be stored correctly.

●For information on scrambled broadcasts, refer to AWhen Receiving A Scrambled BroadcastB (A pg. 81).

IMPORTANT:

●In certain reception conditions, station names may not be stored correctly, and Auto Guide Programme Number Set may not work properly. When the Guide Programme numbers are not set properly, the programme that you do not intended to record will be timer recorded by the SHOWVIEW system of the unit. When programming the timer using the SHOWVIEW system, be sure to check the desired channel is selected correctly. ACheck, Cancel And Change ProgrammesB

(A pg. 53)

●Your unit memorises all receivable stations even if reception of some of them is poor. You can delete those stations with an unacceptable picture from the list. (A pg. 80, ADelete A ChannelB)

NOTES:

●Fine tuning is performed automatically during Auto Channel Set. If you want to perform tuning manually, refer to AFine-Tuning Channels Already StoredB (A pg. 81).

●If you perform Auto Channel Set when the aerial cable is not connected properly, ASCAN COMPLETED-NOSIGNAL-Bappears on the TV screen in step 7. In such a case, make sure of the aerial connection and press ENTER; Auto Channel Set will start again.

●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect. Select the appropriate TV system for those channels. (A pg. 80,

AINFORMATIONB).

3Press selection keys to select AAUTO CH SETB, then press ENTER for confirmation.

4Press selection keys to select your country’s name, then press

ENTER.

5Press selection keys to select the language of your choice.

DVD SET UP

 

FUNCTION SET UP

INITIAL SET UP

 

 

 

 

 

AUTO CH SET

MANUAL CH SET

 

GUIDE PR

CLOCK SET

 

 

 

 

 

 

SET UP

OK

SELECT WITH [CURSORS]

EXIT

SELECT

THEN PRESS [ENTER]

 

 

 

 

 

DVD SET UP

FUNCTION SET UP INITIAL SET UP

INITIAL SET UP / AUTO CH SET

 

 

ENGLISH

DEUTSCH

FRANCAIS

ITALIANO

ESPAÑOL

NEDERLANDS

SVENSKA

NORSK

SUOMI

DANSK

 

 

SET UP

OK

SELECT WITH [CURSORS]

RETURNSELECT

THEN PRESS [ENTER]

79