SUBSIDIARY SETTINGS

RECORDING SET

8SAVE AS LIBRARY ^ OFF / ON

When this function is set to AONB, the recording information is automatically stored in the library. For details, refer to AEdit Library InformationB (A pg. 63).

8XP MODE REC AUDIO ^ DOLBY DIGITAL / LINEAR PCM

You can select the audio format when you record a title in XP mode. When this function is set to ALINEAR PCMB, you can obtain a high-quality audio sound.

DOLBY DIGITAL:

To record in Dolby Digital format.
LINEAR PCM:
To record in Linear PCM format.

8AUDIO REC ^ NICAM1/MAIN / NICAM2/SUB / MONO

You can select the desired NICAM audio channel to be recorded on a DVD-R/RW (Video mode) disc.

NICAM1/MAIN:

To record the main language of NICAM audio.
NICAM2/SUB:
To record the sub language of NICAM audio.
MONO:
To record the standard (monaural) sound of NICAM audio.

NOTE:

This function works only for the NICAM bilingual programme.

8DIRECT REC ^ OFF / ON

When this function is set to AONB, you can easily start recording the programme that you are watching on your TV. While holding R, press I on the remote control, or press R on the unit.

NOTES:

●When you use the Direct Rec function, be sure to use a TV offering T-V LINK, etc. and connect a fully-wired 21-pin SCART cable between the unit and the TV. (A pg. 11)

●If ADIRECT RECB is set to AOFFB, the R button functions as described in ABasic RecordingB (A pg. 39).

●During Direct Rec, A- -Bappears on the front display panel.

●If a programme is recorded with the Direct Rec, the station name will not be registered in the library. A- - - -Bwill be displayed for the station name.

8INPUT COLOUR SYSTEM ^ AUTO / PAL / SECAM

You can play back PAL discs, or record PAL and SECAM signals on this unit. Select the appropriate colour system.

AUTO:

Normally select AAUTOB. AAUTOB identifies the input signal and automatically switches to an appropriate colour system. When AAUTOB is not selected, you have to switch the colour system to an appropriate setting (PAL or SECAM) manually.

PAL:
To record PAL signals.
SECAM:
To record SECAM signals.

DISPLAY SET

8SUPERIMPOSE ^ OFF / AUTO

When this function is set to AAUTOB, various operational indicators appear on the TV screen.

OFF:

To turn off superimposed indications.

AUTO:

To superimpose operational indications for approximately five seconds just after the corresponding operation.

NOTES:

●Even when ASUPERIMPOSEB is set to AOFFB, you can display the various operational indicators by pressing ON SCREEN on the remote control. To clear the operational indicators, press ON SCREEN again.

●When you use this unit as the source player for editing, be sure to set ASUPERIMPOSEB to AOFFB before starting. (A pg. 68)

●When you select AAUTOB, during playback, the operation mode indicators may be disturbed depending on the type of disc being used.

8GREY BACK ^ OFF / ON OFF:

Select this when you want to receive an unstable channel with poor signals.

ON:

When this function is set to AONB, the TV screen becomes all grey when receiving a channel not in use.

8DIMMER ^ BRIGHT / DIMMED1 / DIMMED2 / OFF
You can change the brightness of the front display panel.

BRIGHT:

Normally select this. To turn on the display and blue lamp of the front display panel.

DIMMED1/DIMMED2:
To change the brightness level.

OFF:

To turn off the display and blue lamp of the front display panel.

8POWER SAVE ^ OFF / ON

When this function is set to AONB, you can reduce the power consumption while the unit is turned off.

NOTES:

●During Power Save mode ^
^ the front display panel will be turned off.

●It takes some time for the unit to complete initialisation after you turn on the unit power, with AHELLOB blinking on the front display panel.

8ON SCREEN LANGUAGE

This unit offers you the choice to view on-screen messages in

10 different languages. Although AAuto Set UpB (A pg. 17) selects the language automatically, you can change the language setting manually as required. (A pg. 20)

●For details, refer to AOn-screen Language SetB (A pg. 20).

75