WTC 600 LP / MP | OPERATION OF THE SYSTEM |
3.4.5Putting Out of Operation
CAUTION Normally, do not switch off with the main switch (a possibly active flushing program may be interrupted).
NOTE The RO system working in normal operation is switched off only via the float switch when the drinking water tank is full.
NOTE The current operating mode is also maintained in the switched off condition, meaning after switching on again, the control system is in the same operating mode as before switching off last with the main switch.
The system is switched off e. g., when putting out of operation for extended periods. For
Enter user password for this (compare with Chapter 3.4.3.1):
Indication:
Press the pushbutton.
Indication:
Press the RETURN pushbutton.
Indication:
Press the pushbutton.
Indication:
Press the RETURN pushbutton.
Indication:
Press the | pushbutton. |
Indication:
Press the RETURN pushbutton.
Indication:
Press the ESC pushbutton.
Indication:
>1 ackn. failure <
2 operat. mode
1ackn. failure
>2 operat. mode <
operation mode
OPERATION
operation mode
Stop
are you sure ?
>no< yes
are you sure ?
no | > yes < |
1 ackn. failure
> 2 operat. mode <
RO 1000 V 01.34
Stop
The equipment is switched off now.
Service Handbook 08.2004 | 41 |