Karcher 600 CD 1.5Terms and Definitions, 1.6Declaration of Conformity, WTC 600 LP / MP, Appendix

WTC 600 LP / MP APPENDIX

1.5Terms and Definitions

The following scripts will be used for this manual:

Item		Script	Examples
keys		capital letters + bold	LEFT, UP, DOWN
LED's		capital letters + bold	RINSE, DISPOSAL
inlets/outlets		capital letters + bold	PUMP FAILURE, INLET VALVE
operating settings		italics	ps-hard water, ps-pumps
operating parameters		italics	LIM, t-rinse
operating modes		capitals + underligned	STOP, ON
operating conditions		capitals + underligned	PRODUCTION; DISPOSAL
operating failure		capitals + underligned	MOTOR FAILURE, FORCED STOP
The following abbreviations will be used:
– Cy-perm	permeate conductivity
– t-perm	permeate temperature

Remark: The terms on/off as well as STOP and OPERATION could cause mix-ups; they are therefore defined as follows:

–On/off describes the existence/non-existence of the mains supply voltage

–STOP and OPERATION describe an operating condition which obviously only can exist when the system is switched on.

1.6Declaration of Conformity

The Control Unit complies with the following standards and test regulations: (to be fixed in the framework of the CE conformity standards)

Service Handbook 08.2004 71