APPENDIX

WTC 600 LP / MP

2 Installation/Start-up

2.1Basic Requirements for System Installation

The following remarks have to be observed during installation and connection of the RO 1000 unit:

–The connected consumers must not exceed the max. admissible loads of the circuit outputs as well as the total output of the unit (see item 5) (in case of inductive loads, the phase angles have to be taken into account).

–All inductive consumers (valves, motors, contactors, transformers) of the unit have to be provided with suitable interference suppressors (RC element, varistor, diode)

–Should other devices with a high mains-borne interference level be installed in the surroundings of the control system, suitable external interference suppressors (line filters) have to be installed at the supply voltage input.

–The clamps must not be actuated with too much force.

–The screw-less terminal clamps are suitable for single-core and fine core conductors (without sleeves) of up to 0.5mm2 (for sensor and analog output terminals) and up to 2.5 mm2 respectively (all further terminals). According to the manufacturer's instructions it is not necessary to use core sleeves.

–All assembly activities have to be done in accordance with the corresponding VDE regulations.

2.2Start-up

For the first start-up of the unit after its installation, the below-mentioned steps have to be carried out in the given order. Should the control system not operate in the described manner or if other malfunctions are discovered, the electric supply has to be interrupted immediately (and repaired by the manufacturer).

1.Install control and fix all terminal clamps. It has to be taken into account that the softener output is not protected by fuses. A short-circuit at this output may therefore destroy the conductor lines.

2.Switch on mains supply voltage è after at most 5 sec a text has to be displayed on the LC display (otherwise switch off è repair).

3.Carry out diagnostic program (see item 3.3) and test all inputs and outputs of the control unit. Should the fuse on the pc-board become active, one of the valve outputs is short-circuited.

4.Set operating modes and parameters (see item 4).

5.Calibrate sensors (see item 4.4.2).

72

Service Handbook 08.2004

Page 71 Page 73
Page 72
Image 72
Karcher 600 CD manual Start-up
Page 71 Page 73

600 CD specifications

The Karcher 600 CD is an innovative cleaning machine designed to tackle a wide variety of dirt and grime in both professional and domestic settings. Renowned for its efficiency, versatility, and user-friendly design, this powerful equipment is particularly well-suited for cleaning large areas such as driveways, patios, and commercial spaces.

One of the standout features of the Karcher 600 CD is its robust pressure cleaning capability. It boasts a maximum pressure output that effectively removes stubborn stains, embedded dirt, and even algae with minimal effort. The adjustable pressure settings offer the flexibility needed for different surfaces, ensuring that delicate materials are not damaged while still achieving optimal cleaning results.

The Karcher 600 CD employs advanced cleaning technologies such as the patented Dual Nozzle System. This feature ensures a consistent and thorough clean by utilizing two high-pressure nozzles that work in unison. The nozzles are adjustable, allowing users to customize the spray pattern according to the task at hand. Whether it’s rinsing large surfaces or precision cleaning in tight spots, the Karcher 600 CD excels in delivering superior results.

In terms of ergonomics, the Karcher 600 CD is designed for user comfort. It features a lightweight and compact build that allows for easy maneuverability, even in hard-to-reach areas. The integrated handle and wheels enhance portability, making it effortless to transport the machine from one location to another.

Energy efficiency is another key characteristic of the Karcher 600 CD. The machine is engineered to consume less water and energy while still providing powerful cleaning performance. This eco-friendly aspect not only reduces operational costs but also aligns with sustainable cleaning practices.

Furthermore, the Karcher 600 CD comes with a range of accessories and attachments that enhance its functionality. Users can switch between different cleaning tasks seamlessly, whether it’s washing vehicles, cleaning decks, or revitalizing outdoor furniture.

The Karcher 600 CD stands out in the cleaning equipment market for its combination of power, versatility, and efficiency. With its user-centric design and advanced features, it is ideal for homeowners and professionals alike who seek effective and reliable cleaning solutions.
Top Page Image Contents