WTC 600 LP / MP | APPENDIX |
4.2Basic elements
The whole user surface of the control system is composed by basis functions such as password entry, menu selection, selection of settings, numerical entries etc. The description of the basic functions will be followed by the operating elements of the menus for users/ techniciens.
4.2.1Password entry
The entry of the password is the only way to gain access from the normal level to the user/ technician level. User and technician have different passwords.
For user's password entry, the following keys have to be actuated in the normal level,within one minute.
For technician's password entry, the following keys have to be actuated in the normal level, within one minute.
ESC | ESC |
For technician's password entry, the following keys have to be actuated in the normal level, within one minute.
4.2.2Selection of menu
A menu is used to select or call specific functions. It consists of several numerical menu points (lines) listed one below the other. The text display of the control system always shows two of these menu lines, that means it always displays a
This selected menu point is
A menu is finished with the ESC key (return to normal level). At certain program points (settings, calibrations, uncommitted input) nested menus appear. That means that the selection of a menu point starts a further menu
4.2.3 Selection
The selection serves to chose one out of different options (usually operating settings). When a selection is called in (e.g. via a menu) the name of the selection appears in the upper display line (operating settings), the lower line displays the current status (value). With the / keys all
further options can then be displayed. As soon as the |
|
| key is pressed, the currently displayed |
| |||
option is then accepted (stored) as new operating setting. |
|
A selection can be interrupted with the ESC key without having carried out any modification.
Service Handbook 08.2004 | 81 |