Installing the fax driver
2
–If the connection to this machine cannot be detected and the list is not displayed, select “Specify the Printer/MFP Except for the Above. (IP Address, Host Name...)”, click the [Refer to] button, and then go to step 6.
–When the connection to the machine cannot be detected, the list is not displayed. If the printer cannot be detected, turn the machine off, then on again.
When turning the power off, then on again, wait at least 10 seconds before turning the power on again; otherwise, this machine may not function properly.
6 Select the connecting method, and then click the [OK] button.
–If connecting with Port9100, select “IP Address/IP Host Name” and type in the IP address.
–Beside “Local Port”, select “USB” for a USB connection, or select “LPT1” for a parallel connection.
Fax Driver |
