Installing the fax driver
2
10 Remove the
2.4.2For Windows Vista/Server 2008
1After using a USB or parallel cable to connect this machine to a com- puter, turn on the computer.
–Do not disconnect or connect the cable while the computer is start- ing up.
2Turn the main power of this machine on.
The Found New Hardware Wizard dialog box appears.
–If the Found New Hardware Wizard dialog box is not appeared, turn the main power off, then on again.
When the turning the power off, then on again, wait at least 10 sec- onds before turning the power on again; otherwise, this machine may not function properly.
3Click “Locate and install driver software (recommended)”. The dialog box prompting you to insert the disk appears.
–If the disk is not available, click “I don’t have the disk. Show me oth- er options”. In the next screen, select “Browse my computer for driver software (advanced)”, and then specify the desired fax driver folder.
4Insert the printer driver
The information on the disk is retrieved. A list of software supporting this machine appears.
5Specify the name of the desired fax driver, and then click the [Next] button.
6Follow the
–If the User Account Control or Digital Signature window appears, click the [Continue] or [Yes] button.
–If the Verify the publisher dialog box of Windows Security appears, click “Install this driver software anyway”.
7
8
When the installation is completed, click the [Close] button.
After installation is completed, make sure that the icon of the installed printer appears in the Printers window.
Fax Driver |