Setting up the fax driver (Windows)

3

Length: Specifies the length of the custom paper size according to the selected measurement unit.

Unit: Selects the measurement unit that specifies the size.

3 Click the [OK] button.

3.4.2Specifying user authentication settings

If user authentication settings have specified on the machine, you must enter a user name and password.

Note

If a fax is sent using a user name or password that is not registered with the user authentication settings of the machine or if a fax is sent without the “User Authentication” check box selected, the fax is deleted without being authenticated by the machine.

If user authentication settings have been specified on the machine when “Enhance Security” is set to “ON” or access locks are specified with the software switch settings, incorrectly entering user authentication infor- mation locks the machine so that no operation can be performed by the corresponding user. For details on the user authentication settings and enhanced security settings, refer to the User's Guide [Copy Operations].

!

Detail

If user authentication settings have not been specified on the Configure tab, user authentication is not performed. To perform user authentication, be sure to specify the appropriate settings under “Device Option”. For details, refer to "“Specifying the Configure tab settings” on page 3-24.

Fax Driver

3-16

Page 63
Image 63
Konica Minolta 282, 222, 362 manual Specifying user authentication settings, Detail