Konica Minolta 282 2.4Installing the fax driver using Plug and Play, 2.4.1For Windows XP/Server

Models: 362 222 282

1 94
Download 94 pages 37.97 Kb
Page 42
Image 42
2.4Installing the fax driver using Plug and Play

Installing the fax driver

2

2.4Installing the fax driver using Plug and Play

2.4.1For Windows XP/Server 2003

1After using a USB or parallel cable to connect this machine to a com- puter, turn on the computer.

Do not disconnect or connect the cable while the computer is start- ing up.

2Insert the printer driver CD-ROM (Driver CD-ROM Vol.1 PCL Driver) into the computer’s CD-ROM drive.

3Turn the main power of this machine on.

The Found New Hardware Wizard dialog box appears.

If the Found New Hardware Wizard does not start up, turn the main power off, then on again.

When turning the power off, then on again, wait at least 10 seconds before turning the power on again; otherwise, this machine may not function properly.

4Select “Install from a list or specific location (Advanced)”, and then click the [Next] button.

If the Windows connect to Windows Update dialog box appears, select “NO”.

5From “Search for the best driver in these locations”, select “Include this location in the search”, and then click the [Browse] button.

6Specify the desired folder on the CD-ROM that contains the fax driver, and then click the [Open] button.

Select the specified folder according to the printer driver to be used, the operating system, and the language.

Fax driver: “Driver_Fax\Drivers\FAX\Language folder\Win_x86 (for a 64-bit operating system, "Win_x64")” folder on the Driver CD- ROM Vol.1 PCL Driver

7Click the [Next] button, and then follow the on-screen instructions.

When the Windows logo test and Digital Signature dialog box ap- pears, click the [Continue Anyway] or [YES] button.

8

9

Click the [Finish] button.

When installation is complete, make sure that the icon of the installed printer appears in the Printers and Faxes window.

Fax Driver

2-22

Page 42
Image 42
Konica Minolta 282, 222, 362 manual 2.4Installing the fax driver using Plug and Play, 2.4.1For Windows XP/Server