Krell Industries None manual Configure FPD Display, Configure Serial Control

Tochangethe line numberon whichthe display appears,usethe 1" $ keys(80) to move to LINENUMBERWith.the blinking cursornextto LINENUMBER,pressenter (83), thenuse

~.], keys(80) to selectthe screenline. Therangeis 0 (top line of screen)through (bottomline of screen).A doublearrowon the right side of the screenmovesup and

down,indicatingline position. Pressenter(83) to set the selection.SelectOKandpress enter (83) to return to the operationmenu.

Configure FPD Display

Thefront paneldisplay(FPD)feature allowsyouto adjust the FPDdisplaybrightness.

Select FPD DISPLAYCONFIGUREand pressenter (83). TheFPD DISPLAYCONFIGUREscreen

appears:

KRELL HTS

-FPD DISPLAY CONFIGURE-

1~' BRIGHTNESS3 ~

OK

Pressenter(83), thenuse1' $ keys(80) to select BRIGHTNESSTherange. is 0 (off) (brightest,the factorydefault). Pressenter(83) to set the selection.SelectOKandpress enter(83) to return to the operationmenu.

Configure Serial Control

This screenallows youto choos~.betweenPHASTLink andRS-232serial control sources.Select SERIALCONTROLCONFIGUREand pressenter (83). TheREMOTEFORMAT screenappears:

KRELL HTS

-REMOTEFORMAT-

RS232

OK

Theflashing cursorappearsat RS232Press.enter (83), andthenuse1` $ keys

(80)to select RS232orPHASTPress.enter (83) to set the selection. SelectOKandpress enter(83) to return to the operationmenu.

For moreinformation, see RS-232Port: SendingCommands Interpreting Data, developer'sreferenceshippedwith the HomeTheaterStandard.

Krell HomeTheater Standard 43