Section 2 NAMES OF PARTS
2-4
(1) Start key & indicator
(Press this key when you want to start copying. Copying will
begin immediately if you press this key when the indicator is
lit green.)
(2) Reset/Power key
(Press this key when you want to cancel the currently entered
setting(s) and return to those registered for the initial mode.
Press down on this key for at least 3 seconds when you want to
engage the Off mode. When you want to release the copier
from the Off mode, press any one of the keys on the operation
panel. See page2-5 for details on the initial mode and
page4-7 for details on the Off mode.)
(3) Stop/Clear key
(Press this key when you want to stop copying. Press down on
this key for at least 3 seconds when you want to view the total
copy count. See page6-12.)
(4) Copy quantity/magnification display
(Displays the number of copies to be made or the currently
selected magnification ratio. When the “%” symbol is lit, the
displayed number is the currently selected magnification
ratio.)
(5) Exposure adjustment keys
(Press the left key when you want to make the copy exposure
lighter and the right key to make the exposure darker. Press
down on both keys at the same time for at least 3 seconds
when you want to access the default settings mode.)
(6) Image quality select key
(Press this key when you want to select the desired image
quality mode. See page4-1.)
(7) Number of Copies/ Zoom(+) key
(Press this key when you want to raise the number of copies to
be made, as well as to increase the currently selected copy
magnification ratio. Press this key as well during default
settings in order to select the desired default item or setting.)
(8) Number of Copies/ Zoom(-) key
(Press this key when you want to lower the number of copies
to be made, as well as to decrease the currently selected copy
magnification ratio. Press this key as well during default
settings in order to select the desired default item or setting.)
(9) Recall%/Enter key
(Press this key when you want copy in the Zoom mode. Press
this key as well during default settings in order to select the
current default item or register the currently displayed
setting. See page4-4.)
(10) Reduce/Enlarge key
(Press this key when you want to use the Preset Zoom mode.
See page4-5.)
(11) Paper Select key
(Press this key when you want to switch paper feed between
the drawer(s) and the multi-bypass tray. The indicator for the
currently selected source of paper feed will be lit green. Press
down on this key for at least 3 seconds when you want to
access the default items for paper size selection. See page4-1.)
(12) Thick Paper key & indicator
(Press this key when you w ant to copy onto thic k paper. Make
sure that the Thick Paper indicator is lit green. See page3-9.)
(13) 2in1/4in1 key & indicators
(Press this key when you want to copy with the Layout modes.
Make sure that the 2in1 or the 4in1 indicator, as appropriate,
is lit green. Press down on this key for at least 3 seconds when
you want to access the default items for the Layout modes. See
page5-1 for more information on the La yout modes.)
Operation panel(1)
(2)
(3)
(14)
(15)
(10)(7)(9)(8)(11)(5)(6)
(13)
(16)
(4)(17)(12)
(24)
(23)
(19)
(21)
(22)
(18)
(20)