Section 9 MAINTENANCE AND OPERATION INFORMATION

9 Hold the Process Unit stable and push on the areas marked “PUSH HERE” on the toner container, until the container clicks into place.

10 Push the lock lever back into its locked position (away from you).

Cleaning the charger and the registration roller

Perform the following cleaning operation whenever you replace the toner container.

11 Slide the green-colored charger cleaner knob back and forth 2 to 3 times, then return it to its home position (marked

CLEANER HOME POSITION”).

IMPORTANT!

After cleaning, make sure you restore the charger cleaner to its home position.

If the charger cleaner is not restored to the

CLEANER HOME POSITION”, a black band will appear on subsequent copies.

12 Use the cleaning cloth that is supplied with the new toner kit to wipe off any paper dust and dirt that has accumulated on the metal registration roller (A) inside the copier.

(B)

(A)

IMPORTANT!

While cleaning, be careful to avoid touching the black transfer roller (B).

13 After cleaning is finished, align the pins (C) on both sides of the Process Unit with the guides inside the copier, and slide the Process Unit slowly back into its original position in the copier until in stops.

(C)

(C)

9-4

Page 80
Image 80
Kyocera copier manual Cleaning the charger and the registration roller, Cleaner Home Position