Kyocera copier - page 70

Section 8 TROUBLESHOOTING

8-4

Removal procedures

Paper jam inside the copier

NOTE

If there are any finished copies on the copy storage table,

remove them first before performing this procedure.

1Open the upper front cover.

2Open the front cover.

3Take the Process Unit out of the copier.

4If the leading edge of the jammed paper is visible, pull it

out towards you.

If the paper is not visible at all, perform the “Paper jam in

a drawer” procedure.

If the paper has been fed to the rear of the copier but the

leading edge is not visible, perform the “Paper jam in the

paper eject section” procedure.

5Set the Process Unit into the copier by aligning the pins on

both sides of the Process Unit with the guides inside the

copier, and then slide the Process Unit all the way back into

the copier until it stops.

6Close the front cover.

7Close the upper front cover.

Contents

Main Page i Introduction to this Operation Guide Symbols in this guide ii CONTENTS Page iv About the International Energy Star Program Low Power Mode Off Mode Paper Recycling v Page 1-1 Section 1 IMPORTANT! PLEASE READ FIRST. CAUTION LABELS NOTE: DO NOT remove these labels. 1-2 INSTALLATION PRECAUTIONS Environment Power supply/Grounding the copier Handling of plastic bags 1-3 PRECAUTIONS FOR USE Cautions when using the copier 1-4 Cautions when handling consumables 1-5 SAFETY OF LASER BEAM 1-6 1-7 LIMITED WARRANTY FOR NEW COPIER MODEL 1500 KYOCERA MITA AMERICA, INC. Page Section 2 NAMES OF PARTS Main Body Page Page Operation panel Section 2 NAMES OF PARTS 2-5 Initial mode Auto Clear function Auto Drawer Switching function Page 3-1 Section 3 PREPARATIONS Loading paper Note when adding paper Loading paper into a drawer 3-2 1 2 3 4 Page Page 3-5 4 Setting paper on the multi-bypass tray 3-6 1 2 3 4 3-7 1 2 4 5 3-8 1 2 3 3-9 Thick Paper mode 1 2 1 Attaching the face-up tray 3-10 2 4-1 Section 4 BASIC OPERATION Basic copying procedure 1 2 3 5 6 7 8 4-3 9 1 2 3 Making enlarged and reduced copies 4-5 1 2 3 Available magnification ratios (in the order they can be scrolled through*) Low Power mode 4-6 Off mode 4-7 More about the Off mode Page 5-1 Section 5 COPY FUNCTIONS 2-in-1 Layout modes Page Page Page Section 5 COPY FUNCTIONS 5-5 4-in-1 Caution on setting the originals 1 2 Page 4 1 2 4 Page Section 5 COPY FUNCTIONS 5-10 Registering the program 1 Program function 2 3 Using programmed settings to make copies 1 6-1 Section 6 COPY DEFAULT SETTINGS Available default items 6-2 6-3 6-4 6-5 6-6 1 Accessing and changing the default settings 2 4 Page 6-8 8 9 10 11 12 Page 6-10 20 21 22 23 24 28 29 30 31 32 1 (1) (2) (3) 2 3 Checking the total copy count and printing out a report Section 7 OPTIONAL EQUIPMENT (3)(2) (4) (5)(1) Document Processor Acceptable originals Notes on acceptable documents 1 2 7-3 Setting originals on the platen 1 2 3 DO NOT leave the Document Processor open as there is a danger of personal injury. 7-4 Paper Feeder Additional Memory 8-1 Section 8 TROUBLESHOOTING If one of the following indications is displayed Indication Procedure Reference 8-2 Indication Procedure Reference If paper jams Page Page Page Page Page 8-9 If other trouble occurs Trouble Checkpoint Procedure Reference 8-10 Trouble Checkpoint Procedure Reference 9-1 Section 9 MAINTENANCE AND OPERATION INFORMATION (a) Cleaning the copier 9-2 1 2 3 Replacing the toner container DO NOT attempt to incinerate the toner container. Dangerous sparks may cause burns. Page 9-4 9 (C) (C) (A) 10 Cleaning the charger and the registration roller Page Specifications 9-6 Main Body 9-7 Document Processor (option) Paper Feeder (option) Additional Memory (option) Environmental Specifications 9-8 9-9 Available options Optional equipment 9-10 Appendix: Functions and settings combination chart Function selected first Function selected second Index Numerics A B C S T U W Z